Wildguzzi.com
General Category => Bike Builds, Rebuilds And Restorations Only => Topic started by: El Vikingo Tropical on March 05, 2022, 02:24:43 AM
-
This is my first Guzzi project so I have a lot to learn about the brand, model and what direction to go.
Yesterday I pulled of the standard fork and tested what will be the one for this bike.
I use a CBR900RR 1987 unit as it’s one of the best conventional fork options around, I prefer not use upside down forks at this kind of classic bikes as I feel their looks out of place.
One funny thing I discovered is the CBR unit and the old Guzzi forks use same wheel bolt diameter!
(https://i.ibb.co/XxH1V9n/861-A0-E61-19-AF-4239-9127-10-BA475-AE7-C1.jpg) (https://ibb.co/XxH1V9n)
(https://i.ibb.co/nkvCXrH/657-CE8-A5-BF2-F-4251-9353-75-DA419-B14-A7.jpg) (https://ibb.co/nkvCXrH)
(https://i.ibb.co/2nnDCnv/CD43-F659-3794-4-AB1-94-CA-8-DB89-ED149-AA.jpg) (https://ibb.co/2nnDCnv)
-
Looks like a nice project! I used a pair of forks off a Guzzi EV. Same steering stem and axle. The forks are longer so a set of Tommaselli adjustable bars clamp on the tops.
-
Next step is disassemble completely for modify, blast and paint of the chassis
-
Great project. I may be doing just the opposite - reverting a GSXR front ended CX back to stock. Please keep posting.
-
Well today I tested a set of wire wheels from a California 1000. They need some polishing but will look nice once at place
(https://i.ibb.co/vJBMFKg/E26773-F0-0662-4-E7-D-87-D4-6-AA5661-D6-DF3.jpg) (https://ibb.co/vJBMFKg)
(https://i.ibb.co/Z8N71t3/C91-FDCA6-1-C6-F-4-D41-AC5-A-4-DC50-F581760.jpg) (https://ibb.co/Z8N71t3)
(https://i.ibb.co/bJDF1wD/A3-A4-B423-B42-C-47-DC-BA7-E-ABE6193-CC6-F5.jpg) (https://ibb.co/bJDF1wD)
-
very nice!
-
Where at the web do they sell new SS spokes for the wheels?
-
Buchanan's Wheels in the US-http://www.buchananspokes.com (http://www.buchananspokes.com)
-
Overhaul this wheels show up being a bit more difficult then aspected, the spokes nipples was very rusty and impossible to turn, the spokes was also very hard to take out as the wheel centres suffered aluminium oxidation.
I had to cut the spokes, heat with a gas blower and smack them out with the hammer….
Once released from spokes I soda blasted all to prepare for base coat and painting
(https://i.ibb.co/mTVwtMF/8-D5-E7-BFA-7212-4315-A5-AE-234012-DE88-C6.jpg) (https://ibb.co/mTVwtMF)
(https://i.ibb.co/vVZ0BSw/2-AE139-F1-020-A-4-D8-D-86-CA-EF8-DF659-FB1-D.jpg) (https://ibb.co/vVZ0BSw)
(https://i.ibb.co/9qqrbN6/107-AB1-CD-69-EE-4707-9711-221-EB8558746.jpg) (https://ibb.co/9qqrbN6)
-
I found this place who have good reputation in Europe fore spokes:https://es.e-spokes.eu/k113,radios-lisos-motocicleta.html
-
Time for polishing and cleaning, it’s not a fun job but I have to say very satisfying seeing how this old metal change appearance..
(https://i.ibb.co/0GzXZcm/EBA22125-80-BF-4-B41-8-FE1-D08-B728-EA01-A.jpg) (https://ibb.co/0GzXZcm)
(https://i.ibb.co/Bc5B0Xg/4-EF2-A17-F-40-EF-4-D38-9-B77-F0-B2-D77-DCCFB.jpg) (https://ibb.co/Bc5B0Xg)
(https://i.ibb.co/8jRR8YK/B1-AF3684-A70-B-4-C8-E-940-A-D5-E731-D8-DA53.jpg) (https://ibb.co/8jRR8YK)
(https://i.ibb.co/zn4GhgB/40-C6-F469-4934-4-EAC-9628-7-C5-AEBA58792.jpg) (https://ibb.co/zn4GhgB)
(https://i.ibb.co/zGCtZYc/57981-F80-8-B02-48-C5-830-B-AAA00-B8-D06-C7.jpg) (https://ibb.co/zGCtZYc)
(https://i.ibb.co/6rVxWLK/FA430-B7-D-B6-AD-4780-ACEC-D6-B5671-BB44-A.jpg) (https://ibb.co/6rVxWLK)
-
The wheels have been finished with new (wider) rims and SS spokes.
I have also made by water cutting in oem shape adapters to put on the Yamaha R6 discs improving braking power.
(https://i.ibb.co/SVKbkMw/DC71547-D-7464-4-C8-D-AC84-E43-FD494-D7-C0.jpg) (https://ibb.co/SVKbkMw) (https://i.ibb.co/8MHnRXy/5-CE7-F72-F-1-FE3-44-B6-85-E1-6-DBD4-E5-DA679.jpg) (https://ibb.co/8MHnRXy) (https://i.ibb.co/bdJtYdm/E2-F096-F7-23-D9-4-C12-A9-FF-290672-ACFA5-D.jpg) (https://ibb.co/bdJtYdm) (https://i.ibb.co/q1mRMJH/939-B9000-A9-E8-4-CEA-92-CF-37-B668-A80-A7-D.jpg) (https://ibb.co/q1mRMJH) (https://i.ibb.co/Tk4w2xm/45-A0-B758-3222-47-F2-98-B8-A1-DB7882-BF89.jpg) (https://ibb.co/Tk4w2xm) (https://i.ibb.co/6t7zjfN/652-E93-D6-02-FD-4-E46-A349-1510-B04864-A8.jpg) (https://ibb.co/6t7zjfN) (https://i.ibb.co/ph0r6D2/4-BF4-E25-B-9-AA0-401-D-AB50-F660-DF03-CB36.jpg) (https://ibb.co/ph0r6D2) (https://i.ibb.co/7Kszv52/29-A0267-F-E6-D9-4-B88-B307-FAD4-E9959-D05.jpg) (https://ibb.co/7Kszv52) (https://i.ibb.co/wpg50vf/CE791-AD7-9827-4015-BF85-185-C04-A615-E4.jpg) (https://ibb.co/wpg50vf)
-
Chassis was raised a bit as I’m not used sitting so low without putting no weight at front wheel
(https://i.ibb.co/Jr7hyLg/9567-D5-F5-C5-C6-4-B32-95-E0-7114-E04-E51-A4.jpg) (https://ibb.co/Jr7hyLg)
(https://i.ibb.co/Jx7nMmn/B9-A9-F96-E-9477-45-FC-8-C2-A-E247316-C3082.jpg) (https://ibb.co/Jx7nMmn)
(https://i.ibb.co/Dgsp0Gw/71-BFE181-4-FB8-48-D3-A5-E1-EE2-B83-F01-D2-D.jpg) (https://ibb.co/Dgsp0Gw)
(https://i.ibb.co/8M9CgB1/8837-EAB1-9-CBA-4935-A49-F-4-DF8-A1-AACE69.jpg) (https://ibb.co/8M9CgB1)
(https://i.ibb.co/Cn0X7PV/211-BB3-CB-EA45-4257-BBF2-A0-C82-BF3-F0-CB.jpg) (https://ibb.co/Cn0X7PV)
-
I sprayed chassis in red candy
(https://i.ibb.co/wWKcC1z/CE790-AC2-CC43-40-ED-813-C-F28-D5076-CCFB.jpg) (https://ibb.co/wWKcC1z)
(https://i.ibb.co/ZhpCDq5/1-D312236-FCEE-4-FFF-B79-E-B7-BEF91261-A6.jpg) (https://ibb.co/ZhpCDq5)
(https://i.ibb.co/1nt3hBs/CECF522-F-31-FD-475-F-ABAE-69990-C4-B74-B4.jpg) (https://ibb.co/1nt3hBs)
(https://i.ibb.co/z4x8VMj/26-C95-D81-2-ED2-4927-82-DD-1-D5-F6668-CEAC.jpg) (https://ibb.co/z4x8VMj)
-
Now it’s begin to looking like a bike again
(https://i.ibb.co/Gk1CyFF/65-C8-E22-E-9359-467-D-91-AF-978555-EBA6-D1.jpg) (https://ibb.co/Gk1CyFF)
(https://i.ibb.co/Jr7hyLg/9567-D5-F5-C5-C6-4-B32-95-E0-7114-E04-E51-A4.jpg) (https://ibb.co/Jr7hyLg)
(https://i.ibb.co/rsMM2Gz/E9-A5-AD40-9-E7-F-414-A-AD33-9-D382-A6-E539-E.jpg) (https://ibb.co/rsMM2Gz)
(https://i.ibb.co/98r0tZS/20-F7-A734-0830-4134-A183-6-BBB3-A1-C6699.jpg) (https://ibb.co/98r0tZS)
(https://i.ibb.co/9gYZy1x/F9057-DF2-8-CBA-4963-8-ACA-AD8266-A8040-A.jpg) (https://ibb.co/9gYZy1x)
(https://i.ibb.co/RScMqd8/BB7946-A4-02-E7-4183-8798-8-E9-ABF1-CE0-F2.jpg) (https://ibb.co/RScMqd8)
-
Son of a mongoose…!
That’s looking damn good. :bow: :thumb: :drool:
If you don’t mind me asking, did you consider a green frame ?
-
Son of a mongoose…!
That’s looking damn good. :bow: :thumb: :drool:
If you don’t mind me asking, did you consider a green frame ?
I already have two bikes with green frame, it’s enough… :boozing: :boozing: :boozing:
(https://i.ibb.co/Gs9nCmp/911-E7-B2-D-83-B5-41-DF-8878-613-CC452-A323.jpg) (https://ibb.co/Gs9nCmp) (https://i.ibb.co/kH1f74Z/7-C9-C76-B4-02-D1-4348-9-F0-F-F102-AAF8-B34-F.jpg) (https://ibb.co/kH1f74Z) (https://i.ibb.co/pXY7LW8/40832995-E9-C1-4-E3-C-9844-CF3-EAF8-BB048.jpg) (https://ibb.co/pXY7LW8) (https://i.ibb.co/CKjJ0xK/D426-F557-BD7-A-449-B-877-E-AC477-A846-C13.jpg) (https://ibb.co/CKjJ0xK) (https://i.ibb.co/vXs7BCD/F0-B65-FD0-0-EE3-4-AA5-A749-B3-F358-C39-FC3.jpg) (https://ibb.co/vXs7BCD) (https://i.ibb.co/M5pcWxM/8-FD19-C98-9702-44-FC-83-AA-A8-B4-F1-BEDD76.jpg) (https://ibb.co/M5pcWxM) (https://i.ibb.co/3YZK41C/3263-D882-3055-4679-9-BA2-F281154-CF5-BD.jpg) (https://ibb.co/3YZK41C)
-
Ok.
What you’re doing is beautiful… :bow: :thumb:
-
Very nice, what size tire on the rear are you aiming for?
-
I have ordered from Spanish mainland a set Pirelli Sport Demon
Rear 140 18”
Front 120 18”
It was hard to find this locally, hopefully there will be room enough space between rear tire and swingarm
-
BRAKING NEWS!
I bought a Ducati ST4s for a coming project, the true is it so nice and practical using as every day drive going for work so I may keep it as it is at the moment..
(https://i.ibb.co/WvyTF3S/108-F3-D6-F-B7-EB-47-F2-9-C4-C-4-EE48-D5-E7-FBE.jpg) (https://ibb.co/WvyTF3S)
-
Did you do the modification to the swinging arm yourself? I've seen this done before but with additional bracing below the arm. Do you think that is necessary on a road bike?
-
Did you do the modification to the swinging arm yourself? I've seen this done before but with additional bracing below the arm. Do you think that is necessary on a road bike?
Honestly I don’t have a clue, I did it just in case..
As always I do everything my self at home,
But as this is some terrific heavy swingarm and transmission I’m considering making a new one in lighter material, but is no priority so this will be done as an evolution later on
-
Interesting build. With 20cm of snow outside my window, I'm following with envy! Please keep posting.
-
I’m back working at this bike, since last I have installed Motogadget Mo.unit blue and mo bottom,
This really nice stuff making a much cleaner and well working electrical installation
-
Engine have been updated with new piston rings and carbs, I have to say I’m very satisfied with how the bike looks!
(https://i.ibb.co/r22CbLJM/IMG-8880.jpg) (https://ibb.co/r22CbLJM)
(https://i.ibb.co/yn8L6p0m/IMG-8881.jpg) (https://ibb.co/yn8L6p0m)
(https://i.ibb.co/r2K8YLmp/IMG-8534.jpg) (https://ibb.co/r2K8YLmp)
(https://i.ibb.co/j1VdHK8/IMG-8901.jpg) (https://ibb.co/j1VdHK8)
(https://i.ibb.co/XkDSsFTg/44364-EA0-72-C2-46-E5-B903-A39-BF6-A86-A7-A.jpg) (https://ibb.co/XkDSsFTg)
-
It's coming together nicely. I love the conventional fork. USD forks on an old bike does nothing for me either and look out of place.
-
This is how the bike looks at the moment, electrical system woks but is not ready, time for upholstery and fit a new modify swingarm
(https://i.ibb.co/C3VRxMKH/IMG-0114.jpg) (https://ibb.co/C3VRxMKH)
(https://i.ibb.co/C3dcJXCv/IMG-0113.jpg) (https://ibb.co/C3dcJXCv)
(https://i.ibb.co/23dd87Zb/IMG-0112.jpg) (https://ibb.co/23dd87Zb)
-
Beautiful job!
Are there no restrictions on Frame modifications in Gran Canaria?
If we did that in the UK, the Bike would have to be put through the MSVA inspection (Motorcycle Single Vehicle Approval).
If it passes, it would be given a new Registration, with a 'Q' prefix.
-
Hi John
More or less same rules in Spain, we need to do a engineer project and go to public “oficial engineering traffic department”, the good thing is I own a engineering company so we do the most by our self, this make it easier and cheaper…
-
My retirement plan was to move to Portugal, my Mother was Portuguese, I'm in the process of getting Citizenship/Nationality at the moment.
It seems though, that you can't do this sort of thing in Portugal, which is a bit of a deal-breaker for me. :sad:
-
Another modification I’m making, is, as I used hub centres from a California 1000, I have shortened a swingarm from that bike, as this wider and stronger, the idea is painting basecoat this afternoon