Wildguzzi.com

General Category => General Discussion => Topic started by: ray bear on March 11, 2022, 11:13:55 PM

Title: wave washer question
Post by: ray bear on March 11, 2022, 11:13:55 PM

Any one know the thickness of the moto guzzi thick wave washers for the main bearings, I have some on hand but they are only 0.80 mm which seems light for  the job there doing, I would have liked to seen more like 1.00 mm . Thanks for any replies.  Ray

Title: Re: wave washer question
Post by: Rolf Halvorsen on March 12, 2022, 03:26:41 AM

0,8mm wave washer Ø8mm is the correct one. (I have never seen any thicker Ø8mm wave washer.)

Positioned between steel screw head and aluminium will be perfect.

Rolf

Title: Re: wave washer question
Post by: ray bear on March 12, 2022, 03:44:07 AM

Thanks Rolf

Title: Re: wave washer question
Post by: Huzo on March 12, 2022, 04:14:07 AM

Answers like that really do put your mind at rest when you’re unsure.

Title: Re: wave washer question
Post by: Scout63 on March 12, 2022, 07:43:18 AM

Amazingly deep bench of great technicians on this site. Sometimes I feel like I’m watching from the bleachers.

Title: Re: wave washer question
Post by: guzzisteve on March 12, 2022, 07:50:00 AM

If you leave the pan off you can look and see if bolts touch the crank.

Title: Re: wave washer question
Post by: Antietam Classic Cycle on March 12, 2022, 08:36:40 AM

DIN137B