Wildguzzi.com
General Category => General Discussion => Topic started by: cappisj1 on June 04, 2022, 10:48:15 PM
-
I feel like there is a proper way to keep the extra gasket “fresh” until I need them? Specifically valve cover, oil pan and rear end sump gaskets. Freezer, ziplock with a couple humidity things dropped in or does it not matter? Even a list of things not to do would be helpful. I have had oil pan gaskets get brittle on me before I use them.
Thanks
-
I consider it a victory just to find the right gasket in the garage when I need it. I store gaskets in overnight envelopes stuffed upright between boxes to keep them flat.
-
Don't hang them from a nail, as I have seen in countless M/C shops.
-
the papery ones (trans cover, eldo RD sump, etc), just soak them in water when you are about to use them. The others I have never had an issue with since I oil gaskets before using which restores flex.
-
All my gaskets are in a wide flat box, some 40yrs old. Only ones that get brittle are the old black stock ones. Always been in non humid environment. I use cardboard between levels. I usually order 10 at a time of whatever I need, I use them up. Head gskts I use copper coat when assembled, they are all fine.
Like Mike says, water the paper ones otherwise they don't fit. Not even new ones.
-
Are there easily memorable rules to the different types of gaskets in terms of applying oil/grease to them? I know some go on dry, some should be lubricated, etc.
-
Nice subject, I often wondered what might be the best way. Mine are in the original plastic package kept flat but no other special treatment. I usually do oil them but I haven't heard of soaking in water.