Wildguzzi.com

General Category => General Discussion => Topic started by: kfz on September 11, 2023, 03:58:34 PM

Title: Saprisa With LED Warning light
Post by: kfz on September 11, 2023, 03:58:34 PM

My Mille GT (Saprisa Charging) is running with a replacement instrument console with LED idiot lights.  This means the warning light for the charging system is lit all the time. 

Anyone know what size resistor I will need to drop the current enough to shut off the light when it shouldnt be?

Kev


(https://i.ibb.co/XsW6GNf/saprisa.jpg) (https://ibb.co/XsW6GNf)

Title: Re: Saprisa With LED Warning light
Post by: bmc5733946 on September 11, 2023, 06:41:03 PM

I have an led bulb in the standard Mille cluster, also Saprisa system, no problem. Mine lights as normal, key on, engine off, and engine running and voltage drops below about 13v. I have replaced all the instrument cluster warning lights and instrument illumination bulbs with LED light bulbs.

Brian

Title: Re: Saprisa With LED Warning light
Post by: kfz on September 12, 2023, 04:57:05 AM

Quote from: bmc5733946 on September 11, 2023, 06:41:03 PM

I have an led bulb in the standard Mille cluster, also Saprisa system, no problem. Mine lights as normal, key on, engine off, and engine running and voltage drops below about 13v. I have replaced all the instrument cluster warning lights and instrument illumination bulbs with LED light bulbs.

Brian

ok,  Weird Mine seems to leak enough power even at full revs to light the LED. 

I'll rewire it and leave a loop of wire on there in case i need to amend.  Not easy to test during a rewire.....

Thanks mate.