Wildguzzi.com

General Category => General Discussion => Topic started by: slopokes on October 15, 2023, 03:20:57 PM

Title: Mille gt1000 with Motoplat ign
Post by: slopokes on October 15, 2023, 03:20:57 PM

Why can’t I find a wiring diagram?.

Title: Re: Mille gt1000 with Motoplat ign
Post by: Bazil on October 15, 2023, 03:53:45 PM

I found one for a small block if that helps...
(https://i.ibb.co/WnqyM2R/workshop-manual-v35-v50-v65-v75-it.jpg) (https://ibb.co/WnqyM2R)

Title: Re: Mille gt1000 with Motoplat ign
Post by: Antietam Classic Cycle on October 15, 2023, 04:44:36 PM

Page 31 of 40 here: https://www.thisoldtractor.com/mg_manuals/workshop_manual_strada-1000_it_en.pdf has a small section regarding the Motoplat ignition. Page 38 of 40 shows the wiring diagram for the Motoplat equipped Strada.

Title: Re: Mille gt1000 with Motoplat ign
Post by: kfz on October 16, 2023, 02:24:33 AM

Quote from: Antietam Classic Cycle on October 15, 2023, 04:44:36 PM

Page 31 of 40 here: https://www.thisoldtractor.com/mg_manuals/workshop_manual_strada-1000_it_en.pdf has a small section regarding the Motoplat ignition. Page 38 of 40 shows the wiring diagram for the Motoplat equipped Strada.

Strada 1000 is  different.  I use the Cali 3 Carb one for my Mille.  That's the closest.

Kev

Title: Re: Mille gt1000 with Motoplat ign
Post by: kfz on October 16, 2023, 02:27:33 AM

Quote from: kfz on October 16, 2023, 02:24:33 AM

Strada 1000 is  different.  I use the Cali 3 Carb one for my Mille.  That's the closest.

Kev

I can see this has a 2 wire Ducati geny  (or maybe it is a saprisa but wrong??),  Mille is Saprisa.

Title: Re: Mille gt1000 with Motoplat ign
Post by: slopokes on October 16, 2023, 06:22:59 PM

Thanks—will see if this works out…

Title: Re: Mille gt1000 with Motoplat ign
Post by: redrider90 on October 16, 2023, 07:52:20 PM

Carmo electronics in the Netherlands sells replacements for MotoPlat electronic systems.
https://www.carmo.nl/index.php?main_page=product_info&products_id=687&language=en