Wildguzzi.com

General Category => General Discussion => Topic started by: fotoguzzi on November 08, 2023, 09:47:31 PM

Title: T3 bs Convert seat
Post by: fotoguzzi on November 08, 2023, 09:47:31 PM

Are the stock T3 and Convert/G5 seats interchangeable? I believe they are but looking for confirmation.

(https://i.ibb.co/WGv9QPQ/IMG-1313.jpg) (https://ibb.co/WGv9QPQ)

(https://i.ibb.co/PwzygT3/IMG-1318.jpg) (https://ibb.co/PwzygT3)

Title: Re: T3 bs Convert seat
Post by: jhem68 on November 09, 2023, 04:51:14 AM

I have swapped my Convert seat between my SP and my 850T without any real issues. A little snug at the grab rail when in the open position on the T but not a real problem, so I would suspect it would be doable.

Title: Re: T3 bs Convert seat
Post by: Tkelly on November 09, 2023, 06:56:56 AM

I did the same thing as the T seat was terrible.

Title: Re: T3 bs Convert seat
Post by: moto on November 09, 2023, 09:44:59 AM

Yes.

But if you will brook a little free advice, the 
Convert seat changes the aesthetics of a T/T3 quite a bit, to my eye.

I ran a leather covered original T3 seat for many years, with a gel insert. Not too uncomfortable. Now I have one of the repro T3 seats sold by MG Cycle, which is very comfortable. Send me a PM if you might be interested in the former.

Title: Re: T3 bs Convert seat
Post by: guzzisteve on November 09, 2023, 10:00:57 AM

Yes, they interchange on different models but there may be snugness by tank or in back (like mentioned) foam to grab rail.
Different models for foam & same basic pan.

Title: Re: T3 bs Convert seat
Post by: Tom on November 09, 2023, 01:04:49 PM

Good to hear you got an answer.  I didn't want to go into the garage and stare at both of the bikes.   :shocked:   :grin: