Wildguzzi.com

General Category => General Discussion => Topic started by: SemperVee on April 28, 2024, 12:58:15 PM

Title: Norge Brake wiring connection
Post by: SemperVee on April 28, 2024, 12:58:15 PM

 I believe I am holding the rear brake connection in my hand and was thinking of splicing into one of these wires for my LED AUX Hyper-lite add.  Can anyone share what wire I should spline into or more than one wire??


(https://i.ibb.co/TwCZDCF/Brake-Connection.jpg) (https://ibb.co/TwCZDCF)
Title: Re: Norge Brake wiring connection
Post by: Paul_Tim on April 29, 2024, 04:33:53 AM
If it's the same as the Stelvio Blue is Ground, Yellow/Green is switched 12V from the brake switches and Yellow/Grey is 12V for the tail light. Quick check with a meter / bulb should confirm it.
Title: Re: Norge Brake wiring connection
Post by: SemperVee on April 29, 2024, 10:19:19 AM

 Thanks Paul.   I think I also need to install a diode or two? - to get it to flash? Do I use one or two diodes as there are two lines separate from ground. *Positaps thanks! Here is what it looks like attached now. Lighting up but not flashing as it should. I believe I need to add a Diode, but to which or both wires is my understanding?
(https://i.ibb.co/2ZfdDBx/IMG-2067.jpg) (https://ibb.co/2ZfdDBx)

(https://i.ibb.co/ysv8kF6/IMG-2068.jpg) (https://ibb.co/ysv8kF6)
Title: Re: Norge Brake wiring connection
Post by: Paul_Tim on April 30, 2024, 09:06:04 AM
Can't help you on the diodes as I don't know the lights/system in question.

Hopefully an adult will be along soon to help you out.
Title: Re: Norge Brake wiring connection
Post by: Pescatore on May 01, 2024, 08:16:11 AM
I would try their troubleshooting chart.
https://hyperlites.com/support/
The module should do the flashing without any external parts.
Title: Re: Norge Brake wiring connection
Post by: SemperVee on May 01, 2024, 09:51:16 AM
Quote from: Pescatore on May 01, 2024, 08:16:11 AM
I would try their troubleshooting chart.
https://hyperlites.com/support/
The module should do the flashing without any external parts.

Thanks for bringing that up, It's a great idea & I have done that>>  Also sent email questions to the company.  Thus far no response from Hyperlites.. 
Title: Re: Norge Brake wiring connection
Post by: SemperVee on May 06, 2024, 05:08:49 PM

UPDATE*  Once I installed a Diode and redid the permanant  wire connections with Posi Taps all is working as it should!    Gotta love a happy ending.