Wildguzzi.com

General Category => General Discussion => Topic started by: wirespokes on May 21, 2024, 09:26:52 PM

Title: T3 Coil parts needed
Post by: wirespokes on May 21, 2024, 09:26:52 PM

I've got a project bike with the older style ignition coils. I'm not familiar with them - they have a screw in the tower for the high tension lead, and threads on the outside of the tower for a screw-on cap. I'm missing the caps.

Would you happen to know where I can find replacements?

Title: Re: T3 Coil parts needed
Post by: Antietam Classic Cycle on May 21, 2024, 10:00:19 PM

You can use the caps from an NGK plug wire splicer.


(https://i.ibb.co/hLLYmSj/NGK-cable-splicer.jpg) (https://ibb.co/hLLYmSj)

Title: Re: T3 Coil parts needed
Post by: wirespokes on May 22, 2024, 10:45:27 AM

 :bow: :bow:

PERFECT!

Thanks, Charlie! Much appreciated.