Wildguzzi.com
General Category => General Discussion => Topic started by: Guzzistajohn on September 09, 2024, 10:17:32 AM
-
(https://i.ibb.co/QQvFCTj/007.jpg) (https://ibb.co/QQvFCTj) (https://i.ibb.co/V013R0J/006.jpg) (https://ibb.co/V013R0J) (https://i.ibb.co/n0WGVKT/005.jpg) (https://ibb.co/n0WGVKT) (https://i.ibb.co/7Kyb2SM/004.jpg) (https://ibb.co/7Kyb2SM) (https://i.ibb.co/qJXTKDR/003.jpg) (https://ibb.co/qJXTKDR) (https://i.ibb.co/X36JWm4/002.jpg) (https://ibb.co/X36JWm4) (https://i.ibb.co/mtZqp6q/001.jpg) (https://ibb.co/mtZqp6q)
Seller is a friend, title in hand. Located in SW Missouri
-
Unless everything that's missing is included, $500.
-
Unless everything that's missing is included, $500.
[/quotet
I would say Antietam Classic Cycle would know best!! :wink:
I always like to see "THE BEFORE" and "THE AFTER", but "cringe" as to the labor / money that is required in between...to bring a poor, neglected Guzzi back to life again... :rolleyes: :shocked: :huh:
(https://i.ibb.co/CB9VWJK/IMG-8535.jpg) (https://ibb.co/CB9VWJK)
(https://i.ibb.co/nPY9TgC/IMG-3542.jpg) (https://ibb.co/nPY9TgC)
(https://i.ibb.co/bdDG5cw/DSC-0014.jpg) (https://ibb.co/bdDG5cw)
-
Trot line weight?? Unless someone needs parts?
-
I've mentioned before, "Sometimes, free is too much." :smiley: I'll bet is has swallowed a boat load of chrome and the crank and bearings are toast. There are usable parts. I wouldn't call it a good resto project.
-
I'm not EVEN considering a resto project. NO thanks!
But I would hate to have to pull that lump AND a fish back into the boat.
-
I would imagine it will bring more money sold in parts than complete.
-
I would imagine it will bring more money sold in parts than complete.
That's what I told my buddy :thumb:
-
Put it in the Swap Meet and see what it will bring.
-
Put it in the Swap Meet and see what it will bring.
DONE!
-
Best feature is the title and frame. That's the makings of a nice bitsa Loop frame hybrid right there. A nice running but rough Convert or G-5 to get parts from, combine them into a nice rider.
-
I had mine in there and the responders wanted a parts list, what? I'm selling 2 apart V700's with open titles, not parts. I pulled my add and wont sell parts lists or whatever. I can tell you what is missing. The rest rusty nuts & bolts are in a box, you can then sort out what to use for assembly.
It's all about their ability to cut the price.
-
I'm not EVEN considering a resto project. NO thanks!
But I would hate to have to pull that lump AND a fish back into the boat.
It would make a *fine* anchor.. :grin:
-
I would have to hold a grudge,
against myself. :undecided:
-
What would it take to get it running? A cylinder head, some exhaust pipes, intake manifolds and some small bits? Chrome bores need to be dealt with?
My outlook on such things might be skewed by Harleys. If that were an Evo Road King, 1k and two weekends and it'd be running and riding.
-
Ima say about Tree Fiddy...
-
Does it come with the Vetter fairing ??
-
the tank would look good in my man cave.