Wildguzzi.com

General Category => General Discussion => Topic started by: whitewolf on June 03, 2025, 02:21:50 PM

Title: Stelvio 1200 NTX ECU map needed
Post by: whitewolf on June 03, 2025, 02:21:50 PM

Could someone please share a 2014 Stelvio 1200 NTX 4V ECU map for a 5AM ECU? I can share mine in return, idle is not working well but you get very nice backfires on deceleration :)

I have the idle issue described on this thread here https://wildguzzi.com/forum/index.php?topic=123163.msg1902114#msg1902114
Meanwhile I got idle choking when the engine is first started and cold, so usually I need to start the motorcycle several times until it runs. Checking older threads and online data I've found many people reporting this issue resolved after writing a new map.

Title: Re: Stelvio 1200 NTX ECU map needed
Post by: Antietam Classic Cycle on June 03, 2025, 02:54:39 PM

http://www.griso.org/

Title: Re: Stelvio 1200 NTX ECU map needed
Post by: Tom H on June 03, 2025, 05:24:47 PM

You might look up about cleaning your stepper motor. It can cause idle issues.

Tom

Title: Re: Stelvio 1200 NTX ECU map needed
Post by: whitewolf on June 04, 2025, 12:51:18 AM

Quote from: Antietam Classic Cycle on June 03, 2025, 02:54:39 PM

http://www.griso.org/

Thanks, I know this site, but if I'm going to pay $100 I'll go to a Guzzi shop, buying an ECU map from over there may not fix my problem and I'm not looking for tuning the bike, I'm hoping someone with a similar Stelvio can just pull out the map and share it

Quote from: Tom H on June 03, 2025, 05:24:47 PM

You might look up about cleaning your stepper motor. It can cause idle issues.

Tom

that's something I didn't tried, thank you, I'll check the stepper motor

Title: Re: Stelvio 1200 NTX ECU map needed
Post by: Tom H on June 04, 2025, 09:25:03 AM

Beetle maps fix some of the issues with stock Guzzi maps.

You can cycle the stepper just by turning on the key for a moment and then turning it off. You will hear it moving.

Tom