Wildguzzi.com
General Category => General Discussion => Topic started by: Seweryn on July 07, 2025, 04:33:13 AM
-
Hi All,
Do you know if the original windshield can be easily installed onto a factory naked Breva and what fixings are required? I have no Breva, but planning to buy one and before I see it I would like to know if this can be fixed to the headlight easily? My 1200 Sport with the dedicated screen has a hollow screw on the side of the headlight where the bolt is fixed for the windshield. How is that on the Breva? I can purchase the screen as on the photo, but need to know what else I would require to install this? Or would you recommend a different screen? I am looking for a small one similar to the one I have in my Sport.
(https://i.ibb.co/4R2cBzz5/Guzz.jpg) (https://ibb.co/4R2cBzz5)
(https://i.ibb.co/xSVxpnzq/Guzzi.webp) (https://ibb.co/xSVxpnzq)
-
I had a look over the parts catalogue for both bikes. They are not the same:
(https://i.ibb.co/yFY8M2Ym/Breva.jpg) (https://ibb.co/yFY8M2Ym)
(https://i.ibb.co/YFVfNjZq/Sport.jpg) (https://ibb.co/YFVfNjZq)
-
Sorry, I can't see any difference
-
Sorry, I can't see any difference
Item 20 and 21 (special screw) is in the Sport model only.
-
Ah, no idea what that is for. If it helps, I have a 1200 Sport fairing on my 850 Breva, fits just fine
-
Ah, no idea what that is for. If it helps, I have a 1200 Sport fairing on my 850 Breva, fits just fine
Thanks,
I am sure the Sport fairing fits Breva, but as it looks it doesn't fit a factory standard Breva without the special fixings (as in the Sport model) in place.
-
No, my bike came with the standard Breva fairing, photo below. The only issue I had was using screws that were too long, these screws interfered with the steering lock(http://<br />[url=https://ibb.co/V0f5t6Qr][img]https://i.ibb.co/V0f5t6Qr/IMG-2102.jpg)[/url]