Wildguzzi.com

General Category => General Discussion => Topic started by: nwguy on July 28, 2025, 02:30:02 PM

Title: Removing tach
Post by: nwguy on July 28, 2025, 02:30:02 PM

What's the trick to removing the tachometer from my 99' Bassa? I've read the manual:

(https://i.ibb.co/0VX53wrz/tach2.jpg) (https://ibb.co/0VX53wrz)


I have the housing off and the stand-offs removed:

(https://i.ibb.co/60mSZBh9/tach1.jpg) (https://ibb.co/60mSZBh9)


I've read this:
https://archive.guzzitech.com/CuringTach-Elec-Carl_A.html

I don't see any remaining fasteners that would hold it in place. Do I need to remove the bezel? Then what?

Title: Re: Removing tach
Post by: nc43bsa on July 28, 2025, 02:44:47 PM

Is the tach case stuck to the rubber ring?

Title: Re: Removing tach
Post by: Wayne Orwig on July 28, 2025, 02:48:28 PM

Pretty sure just pushed into the rubber ring. Maybe a bit of silicone spray and wiggling it.

Title: Re: Removing tach
Post by: nwguy on July 28, 2025, 04:52:04 PM

Thanks a lot. That was it. It was stuck to the rubber ring.

Title: Re: Removing tach
Post by: nc43bsa on July 28, 2025, 05:33:50 PM

 :thumb: