Wildguzzi.com

General Category => General Discussion => Topic started by: lomax on September 14, 2025, 12:34:40 PM

Title: 1981 CX100 adjustable front brake lever
Post by: lomax on September 14, 2025, 12:34:40 PM

1981 CX100 adjustable front brake lever ?? My front brake on the 81 CX100 it too long of a reach for my right hand. Has anyone found and adjustable lever that will work with the stock round Brembo cylinder?

Thanks.

(https://share.icloud.com/photos/0f9vkktgcAMr7MWMYxKPovFWA)

Title: Re: 1981 CX100 adjustable front brake lever
Post by: Guzzistajohn on September 14, 2025, 02:11:42 PM

RATS! Thought you were gonna say you found one  :kiss:
(https://i.ibb.co/XGBdyp7/processed-50-DCF304-265-E-4775-BB0-E-D48-BD92-C88-FB.jpg) (https://ibb.co/XGBdyp7)

Title: Re: 1981 CX100 adjustable front brake lever
Post by: guzzisteve on September 14, 2025, 06:40:11 PM

Somebody used to sell dogleg levers as I remember but not one you can crank w/wheel to get even closer unless you change master.

Title: Re: 1981 CX100 adjustable front brake lever
Post by: Frenchfrog on September 15, 2025, 04:51:39 AM

O&S in the UK made doglegs...long gone.
Use the rectangular master cylinder and then you can get different style adjustable levers.On the clutch side loose the lever and clamp and replace with Centuyro/daytona adjustable ones which also have a better leverage ratio.

Title: Re: 1981 CX100 adjustable front brake lever
Post by: guzzista on September 16, 2025, 02:59:50 PM

Here is a link to brake dogleg lever . I am not associated with ETJ (seller/site)

https://www.eurojamb.com/products/nos-brembo-brake-clutch-lever-round-reservoir-guzzi-ducati-laverda?_pos=32&_sid=daf441793&_ss=r