Wildguzzi.com
General Category => General Discussion => Topic started by: bmc5733946 on October 20, 2025, 09:44:38 AM
-
I'm looking for this bracket and/or accurate measurements thereof! Lemans 85 - 86 lower fairing transverse bracket 28570850.
(https://i.ibb.co/ccM89rtQ/DSC03108.jpg) (https://ibb.co/ccM89rtQ)
Any help is greatly appreciated!
Brian
-
Im also looking for a different bracket . I purchase one last year but misplaced it. Now it's out of stock at Harper's like yours. Error. I guess I'll reach the garage for mine. Good luck
-
I'm looking for this bracket and/or accurate measurements thereof! Lemans 85 - 86 lower fairing transverse bracket 28570850.
(https://i.ibb.co/ccM89rtQ/DSC03108.jpg) (https://ibb.co/ccM89rtQ)
Any help is greatly appreciated!
Brian
I may have one, new, got to look & see if I need it for my LM3. I'll be back.
Edit: Looked & did not see it, have to look deeper. I'll look later after chores. LM3 is strait so don't need it, I got it for an 87 SE. Should be same for all with the wings/wedge in front of cyl's.
-
Is this the same as the bracket for the SP1000?
-
Is this the same as the bracket for the SP1000?
Different. The SP/CX100 bracket is a tubular piece, this one is flat.
-
I found the one off my bike but not the new one. It is in a different box some where I don't know. My wife likes to get rid of cardboard boxes, dumps parts together in a separate one. I do got one, don't remember selling it . Let you know when I find it.
EDIT: Still no find but I measured mine. Wing mount holes are 22 cm across 6 x 1 holes if you are going to make one
Slotted mount bracket slotted holes are centered at 4.5 centimeters across for 8mm bolts
I must have sold it, no can find after looking.
-
I have one from a LM3, and its likely I can even find it in less than a day. email Mike@mphcycles.com to arrange.
-
Mike, email sent!
Brian