Wildguzzi.com

General Category => General Discussion => Topic started by: slowmover on April 08, 2026, 05:34:44 PM

Title: License plate light assembly
Post by: slowmover on April 08, 2026, 05:34:44 PM: Can’t seem to find one. I checked MG Cycle and Harpers. It broke away from the screws. I might could just glue it as I never ride in the dark. Was there a lens on top? It’s a 2013 V7
(https://i.ibb.co/ym4dgvdS/IMG-6146.jpg) (https://ibb.co/ym4dgvdS)
Title: Re: License plate light assembly
Post by: Dirk_S on April 08, 2026, 05:41:35 PM: Is this one on eBay too ugly for you? Could always spray paint it with chrome paint:

https://ebay.us/m/C1qWOy (https://ebay.us/m/C1qWOy)
Title: Re: License plate light assembly
Post by: slowmover on April 08, 2026, 05:52:28 PM: I need the bracket it’s attached to.It bolts on from the back inside the fender.
Title: Re: License plate light assembly
Post by: slowmover on April 08, 2026, 06:00:18 PM: It’s a weird set up. You can’t
(https://i.ibb.co/fG2B33wH/IMG-6152.jpg) (https://ibb.co/fG2B33wH)
access the screws going into it. You have to replace the whole assembly
Title: Re: License plate light assembly
Post by: 73 sport on April 08, 2026, 06:03:00 PM: Unscrew the broken piece, glue it back with acrylic glue. reinforce it with flat tooth picks on the sides. Gently screw it back together.
Title: Re: License plate light assembly
Post by: 73 sport on April 08, 2026, 06:08:31 PM: There should be nuts on the tire side of the fender, undo them , the unit should come off and you should have access to the lens holding screws.
Title: Re: License plate light assembly
Post by: slowmover on April 08, 2026, 08:01:12 PM: I think I’ll glue it. Kind of a cheaply made piece anyway. Thanks all
Title: Re: License plate light assembly
Post by: guzzisteve on April 08, 2026, 08:02:16 PM: Ebay unit is same lite but longer away from fender, more depth. Same base.
Title: Re: License plate light assembly
Post by: MattP on April 09, 2026, 06:53:16 PM: glue it on with silicone or hot glue and ride it