Wildguzzi.com

General Category => General Discussion => Topic started by: pariah on April 13, 2026, 01:35:18 AM

Title: LM2 Rewire etc, question about ignition
Post by: pariah on April 13, 2026, 01:35:18 AM

Hi

I've finally got round to rewiring a (mock 1) LM2. I'm adding relays to ignition, coils, headlights, horn etc, and using 1mm2/2mm2 thinwall with Deutch DT connectors for the loom. New Domino switchgear as well

I've done the wiring diagrams circuit by circuit and would appreciate any sparks looking over the diagram, in case I've made a gooner somewhere

First up, ignition:


(https://i.ibb.co/359S8m9k/Ignition-1.jpg) (https://ibb.co/359S8m9k)

Title: Re: LM2 Rewire etc, question about ignition
Post by: guzzisteve on April 13, 2026, 11:12:45 AM

Wow, no one here answered any help. Wiring looks AOK but for the relay to start solenoid, #30 should be at the 40A positive & #87 to solenoid #85 or 86 is button the other ground. Similar to the other relays in your diagram. Only thing I noticed.
Also noticed that ignition switch is only kill switch, is that correct? Looking at diagrams makes me dizzy.

Title: Re: LM2 Rewire etc, question about ignition
Post by: moto-uno on April 15, 2026, 11:16:10 PM

  Just noticed this , kinda curious , why the relay for the coils ?