Wildguzzi.com

General Category => General Discussion => Topic started by: macaril@optusnet.com.au on May 26, 2026, 01:58:18 AM

Title: Breva sport clamps on standard Breva
Post by: macaril@optusnet.com.au on May 26, 2026, 01:58:18 AM

Hi
Will the Sport clamps bolt straight onto a standard Breva, or do you need a new fork yoke also
Cheers
Rob

Title: Re: Breva sport clamps on standard Breva
Post by: Jon8V on May 26, 2026, 06:35:55 AM

Top triple is the same. The Sport clamps mount in place of the riser bars used on the Breva.

Title: Re: Breva sport clamps on standard Breva
Post by: Mayor_of_BBQ on May 27, 2026, 04:45:38 PM

straight swap if you can find 'em

I did this on my Breva 1100

I run a ProTaper bar 'KX High'

Title: Re: Breva sport clamps on standard Breva
Post by: macaril@optusnet.com.au on May 27, 2026, 06:04:39 PM

Thanks Chad, appreciate that, I assume those bars don't have threads on the end for the bar end weights, or do they
Cheers
Rob

Title: Re: Breva sport clamps on standard Breva
Post by: Jon8V on May 27, 2026, 06:11:36 PM

Quote from: Mayor_of_BBQ on May 27, 2026, 04:45:38 PM

straight swap if you can find 'em

I did this on my Breva 1100

I run a ProTaper bar 'KX High'

Do the OEM wires and cables have enough slack or did you have to extend any?

Title: Re: Breva sport clamps on standard Breva
Post by: macaril@optusnet.com.au on May 27, 2026, 08:47:00 PM

Quote from: Mayor_of_BBQ on May 27, 2026, 04:45:38 PM

straight swap if you can find 'em

I did this on my Breva 1100

I run a ProTaper bar 'KX High'

One more question, did you have to drill the handlebars to fit the controls ? I have read elsewhere this is required
Cheers