Wildguzzi.com

General Category => General Discussion => Topic started by: Turin on June 05, 2026, 11:54:53 PM

Title: Made some High pipes.
Post by: Turin on June 05, 2026, 11:54:53 PM

I made some high pipes for my LeMans SE.

(https://i.ibb.co/7tQY6P05/20260605-211224.jpg) (https://ibb.co/7tQY6P05)

more pics
https://wildguzzi.com/forum/index.php?topic=82621.150 (https://wildguzzi.com/forum/index.php?topic=82621.150)

Title: Re: Made some High pipes.
Post by: davethewelder on June 06, 2026, 05:24:20 AM

Cool, I'd love to make a set for my V7-850.  Does Cone Engineering offer decibel killers?   Did you "purge" the SS pipe when welding?

Title: Re: Made some High pipes.
Post by: guzzi ride on June 06, 2026, 06:47:33 AM

Looks great! Now we need a sound clip rolling down the road.

Title: Re: Made some High pipes.
Post by: Turin on June 06, 2026, 10:23:36 AM

cone engineering offers almost everything. I subbed out the welding. One pipe is slightly crooked and they are a little longer than I'd like. Sound clip later!

Title: Re: Made some High pipes.
Post by: Perazzimx14 on June 06, 2026, 10:34:27 AM

Years ago had the guys in the fab shop weld up an H-pipe for my 850T out of 1-1/2” 304 .065 wall stainless tubing and stainless tee’s. Local muffler shop swaged the ends for a few dollars. Worked a treat and cost was almost nothing.

Title: Re: Made some High pipes.
Post by: Turin on June 06, 2026, 11:49:25 AM

First ride was this morning.  revs past 9k. some tuning required. video deleted

Title: Re: Made some High pipes.
Post by: guzzi ride on June 07, 2026, 04:58:17 AM

Sounds great and like a few of us you have your own rally in your garage.

Title: Re: Made some High pipes.
Post by: Stevex on June 08, 2026, 07:06:06 AM

I dont see any can mounting brackets. What's holding the rear exhaust on?

Title: Re: Made some High pipes.
Post by: Turin on June 08, 2026, 11:03:10 AM

They are a little long and I'll be making adjustments. brackets come later. I'll be using 1/4" stainless rod.

Title: Re: Made some High pipes.
Post by: Turin on June 29, 2026, 07:26:50 PM

All shortened up and brackets complete.
(https://i.ibb.co/Tx5c5fG3/20260629-154448.jpg) (https://ibb.co/Tx5c5fG3)

(https://i.ibb.co/hGZQ92V/20260629-154323.jpg) (https://ibb.co/hGZQ92V)

(https://i.ibb.co/9kKT955t/20260629-154242.jpg) (https://ibb.co/9kKT955t)

Title: Re: Made some High pipes.
Post by: Frulk on July 03, 2026, 03:40:23 PM

Unable to open the video it says the OP took it down.

Title: Re: Made some High pipes.
Post by: lazlokovacs on July 03, 2026, 04:06:26 PM

just perfection!!! what a bike that must be...

congrats

Title: Re: Made some High pipes.
Post by: Turin on July 03, 2026, 05:28:51 PM

I edited the part out where I banged my head on the garage door. here is the replacement video with the pipes shortened. went on a 50 mile rip this morning. I'm pretty happy with it over all. you can see more of it inn the builds section.
https://www.youtube.com/watch?v=Ei0jhCfwOaU (https://www.youtube.com/watch?v=Ei0jhCfwOaU)

Title: Re: Made some High pipes.
Post by: bigbikerrick on July 08, 2026, 02:23:30 PM

Very nice, Turin. They match the lines of the tail perfectly!  Well done , Sir. :thumb:
Rick.

Title: Re: Made some High pipes.
Post by: TN Mark on July 08, 2026, 03:54:27 PM

The video seems to have picked up most of the audio from the valve clatter. It may well be worth putting the camera on a tripod behind the bike.

Well done though, well done indeed. Thank you for the video.

Title: Re: Made some High pipes.
Post by: kingoffleece on July 08, 2026, 07:32:26 PM

I'll hear them Sunday.

Title: Re: Made some High pipes.
Post by: Turin on July 08, 2026, 08:27:04 PM

Yes you will. See you at the shell station!