Wildguzzi.com

General Category => General Discussion => Topic started by: jcb72 on August 19, 2014, 01:53:22 AM

Title: Help on sizing for 2011 v7 racer grips
Post by: jcb72 on August 19, 2014, 01:53:22 AM

HI
I'm wanting to fit a set of POSH BESTON style GRIPS but before investing i'm trying to work out if they will fit, without taking the things off and measuring.
Does anyone know if they are standard 7/8 or "1"  or are they a different beast altogether.

thanks

Title: Re: Help on sizing for 2011 v7 racer grips
Post by: drlapo on August 19, 2014, 09:16:49 AM

22mm or 7/8"
nothing unusual

Title: Re: Help on sizing for 2011 v7 racer grips
Post by: jcb72 on August 19, 2014, 02:50:54 PM

Great.

Thankyou

Title: Re: Help on sizing for 2011 v7 racer grips
Post by: Rick T. on August 19, 2014, 03:24:48 PM

BTW... the POSH grips are considerably thicker than stock.  So if you have smaller hands or prefer thinner grips, you may want to keep that in mind.  I like the Pro Grip 780s or the Tommaselli "Daytona" grips...

(http://www.bevelheaven.com/Products/daytona-grips2.jpg)

Title: Re: Help on sizing for 2011 v7 racer grips
Post by: JProdun on November 27, 2015, 12:15:53 AM

I know it's an old thread, but I do try to search before making a new one. SO if I get no response on here, you'll see me posting a new thread.

The question is about installing any aftermarket grips on the v&'s throttle tube. What do you guys do since the v7's throttle tube is grooved to accept the factory grip?

Thanks

Title: Re: Help on sizing for 2011 v7 racer grips
Post by: Chuck in Indiana on November 27, 2015, 07:11:51 AM

Quote from: JProdun on November 27, 2015, 12:15:53 AM

I know it's an old thread, but I do try to search before making a new one. SO if I get no response on here, you'll see me posting a new thread.

The question is about installing any aftermarket grips on the v&'s throttle tube. What do you guys do since the v7's throttle tube is grooved to accept the factory grip?

Thanks

Same as any other. Stick a compressed air nozzle between it and the throttle tube, blow and push.  :smiley: