Wildguzzi.com

General Category => General Discussion => Topic started by: Allflatblack on January 12, 2015, 02:35:00 PM

Title: Flywheel cleaning
Post by: Allflatblack on January 12, 2015, 02:35:00 PM
The G5 that I am restoring had a previous owner who overfilled the transmission by a quart at least. Every seal was weeping as well as lots of oil out the pushrod tube. Clutch soaked, total mess. I ordered the 4mm clutch kit from stein dinse for A very good price. Normally I would just wash the flywheel and pressure plate with gas a few times and feel fine. I do have a kiln at work that I could then bake it for a while to try to burn all of the residual oil out. Overkill? 400 degrees for two hours?
Title: Re: Flywheel cleaning
Post by: JoeW on January 12, 2015, 02:52:09 PM
I'm not a fan of washing parts in gasoline, leaves a nasty residue not to mention a bit of a fire hazard. I like acetone or brake parts cleaner. Baking it, i think is a bit much. If it were a porous material it might be a good idea but, steel doesn't usually absorb oil.
Title: Re: Flywheel cleaning
Post by: guzzisteve on January 12, 2015, 03:25:56 PM
Clean every tooth w/screwdriver, I use mineral spirits
Title: Re: Flywheel cleaning
Post by: Chuck in Indiana on January 12, 2015, 06:19:49 PM
Mineral spirits worked well on the ex Rocker Lemans V the the "dealer's" "mechanic" grossly overfilled. It's flammable, too.. but nothing like gasoline. I wouldn't...
Title: Re: Flywheel cleaning
Post by: Rich A on January 12, 2015, 06:22:12 PM
Cheap vodka. Sorta non-toxic.

Rich A
Title: Re: Flywheel cleaning
Post by: Chuck in Indiana on January 12, 2015, 06:24:37 PM
Cheap vodka. Sorta non-toxic.

Rich A

Too expensive. (Guzzi content)
Title: Re: Flywheel cleaning
Post by: Allflatblack on January 12, 2015, 08:40:30 PM
Cheap vodka is great for windows. And freshens your breath. Purple degreaser and hot water (to rinse off the gasoline) looks like new.
Thanks guys.
Title: Re: Flywheel cleaning
Post by: Tobit on January 12, 2015, 09:18:12 PM
Brake cleaner then straight Simple Green and a brush if needed.

Dad and I used gasoline to clean parts when I was a kid.  We got lucky.  Ever see a gasoline vapor fireball?
Title: Re: Flywheel cleaning
Post by: normzone on January 12, 2015, 09:53:42 PM
Cheap vodka is great for windows. And freshens your breath.

You're supposed to run a bottle of that stuff through your new still for the first run to clean it out.
Title: Re: Flywheel cleaning
Post by: rodekyll on January 12, 2015, 10:50:31 PM
I take three bottles of cheep vodka and run it through a distiller to make one bottle of very pure alcohol.  I use it as a solvent and fuel -- it will chemically burn you to drink it.
Title: Re: Flywheel cleaning
Post by: Tom on January 12, 2015, 11:39:41 PM
 :+1  Mineral spirits.
Title: Re: Flywheel cleaning
Post by: rodekyll on January 13, 2015, 12:06:12 AM
Hi, Tom.
Title: Re: Flywheel cleaning
Post by: normzone on January 13, 2015, 01:06:53 AM
Glad to know somebody can run a device around here...fruit wash through a pot still is my favorite, but it's not as cold here as where you live.
Title: Re: Flywheel cleaning
Post by: Perazzimx14 on January 13, 2015, 07:24:41 AM
I take three bottles of cheep vodka and run it through a distiller to make one bottle of very pure alcohol.  I use it as a solvent and fuel -- it will chemically burn you to drink it.

Why not just buy a gallon of denatured alcohol for $15.00? Much cheaper than 3 bottles of cheap vodka and more end product.

Or 18lbs of cane sugar, 1 packet of turbo yeast and 5 gallons of water. 7 days later you have about a 20% wine ready for cleaning up.
Title: Re: Flywheel cleaning
Post by: boatdetective on January 13, 2015, 12:33:54 PM
You may want to check your proposed solvents for TCE (trichloroethylene). Highly carcinogenic...
Title: Re: Flywheel cleaning
Post by: Tom on January 15, 2015, 01:06:28 AM
Hi, Tom.

Aloha Dave!  I'm still around.  Work is limiting my time.  Looking at working for myself again.