Wildguzzi.com

General Category => General Discussion => Topic started by: menzies on April 01, 2015, 10:02:41 AM

Title: Install, 06 Breva 1100 Helibars
Post by: menzies on April 01, 2015, 10:02:41 AM

I am trying to fit a set of Helibars to my 06 B1100 and the throttle side controls need to come back around 2 1/2 inches to insert in the bar. I have tried to pull them and loosened everything I can see but they will not pull out anymore. I previously owned an 07 that I fitted a set on and had no problem.

I did a search and came up with only that you had to be creative but no explanation on their creativity.

Title: Re: Install, 06 Breva 1100 Helibars
Post by: guzzi ride on April 01, 2015, 02:41:40 PM

You will need to mount the controls on the Helibars first and then mount the Helibars to top clamp.

Title: Re: Install, 06 Breva 1100 Helibars
Post by: menzies on April 01, 2015, 03:54:20 PM

Quote from: guzzi ride on April 01, 2015, 02:41:40 PM

You will need to mount the controls on the Helibars first and then mount the Helibars to top clamp.

I will try it that way directly, directions state to mount the bars first but your comment stirred my memory and I believe I did do it that way a few years ago my 07, also had to cut the zip ties holding the cables together to get them to stretch, thanks.