Wildguzzi.com
General Category => General Discussion => Topic started by: tonga2 on April 03, 2015, 04:25:20 PM
-
Did a quick look around while starting the bike and noticed a small leak coming from the ypipe/canister.
(https://scontent-sea.xx.fbcdn.net/hphotos-xap1/v/t1.0-9/11102794_10206600751477774_7309971948733236815_n.jpg?oh=96231a956b38fa616723c114276521b5&oe=55BBA30C)
I plan to get a Y-Pipe from either guzzitech or agostini but not right now as I don't have the funds.
My question is which sealer should I use? The Permatex High Temperature Red RTV Silicone Gasket Maker or the Permatex Muffler/Tailpipe Sealer?
Here's a closer look
(https://scontent-sea.xx.fbcdn.net/hphotos-xfa1/v/t1.0-9/19600_10206600751117765_3165442143117427319_n.jpg?oh=6c2c89831b2adc4171d7123a802a8912&oe=55AFC83C)
Thanks
-
Weld it or braze it.
-
mine did that, we had a muffler shop weld it. It is stainless steel, cost about $40 for the weld.
-
If its under warranty make them fix it. Would come under the emissions warranty which is longer than the regular warranty.
Money is money unless it is a far trip to the dealer.
-
If its under warranty make them fix it. Would come under the emissions warranty which is longer than the regular warranty.
Money is money unless it is a far trip to the dealer.
Emissions warranty?
Hmm I'll have to ask my dealer about that didn't think to ask since I think my regular 2 years is up.