Wildguzzi.com
General Category => General Discussion => Topic started by: canuguzzi on April 11, 2015, 12:28:19 PM
-
I've made up some plates that fit to cover the corner pocket areas in the fairing (ahead of the cover underneath the bars) so that one can mount speakers, a volt meter or whatever.
Like all the things I make for the Norge, they can be removed to put the bike back to stock and can be made with simple hand tools.
If there is any interest, I'll post pics and perhaps WG can host the pattern (print and cut) so that anyone with a Norge can make them.
-
That's a cool idea!
It would be great even if they simply opened up so one could put stuff in them. Heck, even open pockets would be good.
-
This is from the pilots perspective. The corner cover is off to the right. If you are into open air music, you could easily put speakers there. I plan to place a really good volt/amp meter there.
(http://i1370.photobucket.com/albums/ag263/NorgePilot/CoverRiderPilotView3_zpsbv82pghx.jpg) (http://s1370.photobucket.com/user/NorgePilot/media/CoverRiderPilotView3_zpsbv82pghx.jpg.html)
Next one is with the bars turned to the right to show more of the corner cover. There is plenty of room behind it to allow for instruments and their wiring.
(http://i1370.photobucket.com/albums/ag263/NorgePilot/PicCornerCover2_zpsiomb5zrc.jpg) (http://s1370.photobucket.com/user/NorgePilot/media/PicCornerCover2_zpsiomb5zrc.jpg.html)
You can see my ASUS Tablet that is used for GPS (I use OSMAND in standalone mode). Great tablet btw. Very fast GPS that also uses GLONAS.
The corner covers attach via black colored screws you can't really see that go into small blocks held onto the fairing via 3M VHB Solar tape. It can come off but not by accident and not without taking some time.
This does allow the bike to go back to completely stock without any drill holes or damage that needs to be hidden.
From the seated position, nothing obstructs the view of any instruments or controls.
-
Ah, now I see. Nice idea!