Wildguzzi.com

General Category => General Discussion => Topic started by: magrahamkp08 on April 21, 2015, 03:07:42 PM

Title: Removing valve guides on v65c
Post by: magrahamkp08 on April 21, 2015, 03:07:42 PM

Any tips on getting the clips that hold the valve guides out?


Sent from my iPad using Tapatalk

Title: Re: Removing valve guides on v65c
Post by: Vasco DG on April 21, 2015, 07:39:35 PM

Heat head, knock guide up a tiny amount. Remove clip reheat head and Biff guide out downward.

Pete

Title: Re: Removing valve guides on v65c
Post by: Kiwi_Roy on April 21, 2015, 07:48:35 PM

To heat put a piece of flat metal over the combustion chamber, direct hot air gun into exhaust port for 10 minutes or so, have gloves ready, it will be too hot to handle.


Sent from my shoe phone!

Title: Re: Removing valve guides on v65c
Post by: magrahamkp08 on April 22, 2015, 08:59:58 PM

I jumped the gun and tossed the head in the oven and drove the guides out "upward" the whole way. Wasn't too difficult but I did notice some scoring the length of the head.
Oh well. Hopefully it won't end up being an issue


Sent from my iPhone using Tapatalk