Wildguzzi.com

General Category => General Discussion => Topic started by: John A on April 24, 2015, 05:51:43 PM

Title: Choke lever needed
Post by: John A on April 24, 2015, 05:51:43 PM

Im looking for a genaric choke lever assembly thay bolts on a 7/8 bar for my V65. fell over and broke. It is made by Magura and is similar to the one used on an Ambo but it is a stand alone unit. Dennis Kirk has nothin ,any place you cats think I should look?

Title: Re: Choke lever needed
Post by: RinkRat II on April 24, 2015, 06:32:27 PM

This looks to easily adaptable until you can find the stock unit.http://www.ebay.com/itm/Choke-Cable-Universal-ATV-Dirt-Bike-Motorcycle-chinese-Loncin-Roketa-Coolster-/181311445578?hash=item2a37011a4a&vxp=mtr (http://www.ebay.com/itm/Choke-Cable-Universal-ATV-Dirt-Bike-Motorcycle-chinese-Loncin-Roketa-Coolster-/181311445578?hash=item2a37011a4a&vxp=mtr)


     Paul :BEER:

Title: Re: Choke lever needed
Post by: rodekyll on April 24, 2015, 07:44:22 PM

Look for british handlebar chokes on ebay.  They should be close to identical.  [edit] or they might be mirrored to what you need and what you want is a british magneto advance lever.

Title: Re: Choke lever needed
Post by: John A on April 24, 2015, 07:51:33 PM

http://www.harpermoto.com/images/thumbnails/2/480/497/14AL7.jpg
Harpers has one!

Title: Re: Choke lever needed
Post by: rodekyll on April 24, 2015, 07:53:31 PM

 ;-T

Title: Re: Choke lever needed
Post by: mtiberio on April 24, 2015, 08:27:16 PM

I got a choke lever for some sort of 500 falcone off of ebay. it came from the old yugoslavia (serbia?). I'm guessing they have tons of nuovo falcone spares. I was going to use it on my EldoVert with the Chinese/Keihin/Amal replacements, but I'm too lazy to fabricate custom cables, so I continue to use individual choke levers on each carb. At least it looks clean that way.