Wildguzzi.com

General Category => General Discussion => Topic started by: Archangel on May 13, 2015, 04:06:33 PM

Title: Stelvio Bar Risers from Moto Bits
Post by: Archangel on May 13, 2015, 04:06:33 PM: http://motobits.com/guzzi.htm#StelvioRiser

Just put these on my Stelvio. A little higher and a little farther back can make a big difference on a long day. Standing up a bit easier too. About 1 inch, no problems with existing cables.
Title: Re: Stelvio Bar Risers from Moto Bits
Post by: JeffOlson on May 13, 2015, 10:04:47 PM: Nice! I wonder if he could make Norge II risers...
Title: Re: Stelvio Bar Risers from Moto Bits
Post by: 2brunel on May 13, 2015, 10:36:06 PM: Very nice. Thanks. I think I will get a set.
Title: Re: Stelvio Bar Risers from Moto Bits
Post by: Dean Rose on May 14, 2015, 05:53:55 AM: Quote from: JeffOlson on May 13, 2015, 10:04:47 PM
Nice! I wonder if he could make Norge II risers...

Breva handlebar risers $145

(http://motobits.com/brevariser.jpg)

Rise 32mm.

Can use stock wiring and hoses.
Good fit and match to stock components
Comes with longer screws (plated)
Title: Re: Stelvio Bar Risers from Moto Bits
Post by: JeffOlson on May 14, 2015, 11:46:16 AM: ^ That's what I am wondering about, something like that.

However, I believe the 2nd generation Norge requires something a little different. It does not have notches on top of the triple clamp or on the bottom of the risers (does it?).
Title: Re: Stelvio Bar Risers from Moto Bits
Post by: andrewdonald1 on May 14, 2015, 06:18:13 PM: Quote from: Archangel on May 13, 2015, 04:06:33 PM
http://motobits.com/guzzi.htm#StelvioRiser

Just put these on my Stelvio. A little higher and a little farther back can make a big difference on a long day. Standing up a bit easier too. About 1 inch, no problems with existing cables.

So just to confirm: no wiring or brake/clutch lines need extending?
Title: Re: Stelvio Bar Risers from Moto Bits
Post by: smdl on May 14, 2015, 08:36:02 PM: Thanks. Ordered a set today!

Shaun
Title: Re: Stelvio Bar Risers from Moto Bits
Post by: Archangel on May 15, 2015, 10:47:28 AM: Quote from: andrewdonald1 on May 14, 2015, 06:18:13 PM
So just to confirm: no wiring or brake/clutch lines need extending?

No cables needed adjusting.
Title: Re: Stelvio Bar Risers from Moto Bits
Post by: andrewdonald1 on May 15, 2015, 12:37:35 PM: Quote from: Archangel on May 15, 2015, 10:47:28 AM
No cables needed adjusting.
or brake or clutch lines?
Title: Re: Stelvio Bar Risers from Moto Bits
Post by: Archangel on May 15, 2015, 01:09:53 PM: Quote from: andrewdonald1 on May 15, 2015, 12:37:35 PM
or brake or clutch lines?

Nothing needs adjusting. Plenty of play with everything.
Title: Re: Stelvio Bar Risers from Moto Bits
Post by: Mayor_of_BBQ on May 16, 2015, 02:54:59 PM: http://pages.ebay.com/link/?nav=item.view&alt=web&id=300696892734

Sent from my iPhone using Tapatalk
Title: Re: Stelvio Bar Risers from Moto Bits
Post by: JeffOlson on May 17, 2015, 12:50:52 AM: Quote from: Mayor_of_BBQ on May 16, 2015, 02:54:59 PM
http://pages.ebay.com/link/?nav=item.view&alt=web&id=300696892734

Rox Speed FX: ^ that is an awesome idea! Thanks! Those might just work for the Norge gen. II.
Title: Re: Stelvio Bar Risers from Moto Bits
Post by: Dean Rose on May 17, 2015, 07:33:53 AM: Quote from: JeffOlson on May 17, 2015, 12:50:52 AM
Rox Speed FX: ^ that is an awesome idea! Thanks! Those might just work for the Norge gen. II.

http://roxspeedfx.com/collections/adv-dual-sport-dirt-bike-handlebar-risers/products/2-pivoting-anti-vibe-bar-risers-for-1-1-8-handlebar
Title: Re: Stelvio Bar Risers from Moto Bits
Post by: andrewdonald1 on May 17, 2015, 03:38:35 PM: Quote from: Archangel on May 15, 2015, 01:09:53 PM
Nothing needs adjusting. Plenty of play with everything.

Cool thanks just wanted to be crystal clear.