Wildguzzi.com

General Category => General Discussion => Topic started by: MikeW on May 22, 2015, 01:27:54 AM

Title: Breva 750 Neutral Switch Replacement
Post by: MikeW on May 22, 2015, 01:27:54 AM

Hi Guys,

Just wondering what's the best way to replace the neutral switch on the Breva 750?

It looks way more difficult than early model small blocks, there is just so much junk in the way! It looks to me like the whole airbox/breather assembly needs to come out along with the battery floor plate to gain access to the neutral switch.

Cheers!

Mike

Title: Re: Breva 750 Neutral Switch Replacement
Post by: guzzisteve on May 22, 2015, 03:56:57 AM

Easier way is just take off RH throttle body.

Title: Re: Breva 750 Neutral Switch Replacement
Post by: sign216 on May 22, 2015, 07:28:50 AM

Mike, after you're done, write up some tips for the rest of us.

Title: Re: Breva 750 Neutral Switch Replacement
Post by: MikeW on May 22, 2015, 11:51:13 PM

How does removing the RH throttle body help?

The neutral switch further back in line with the swing arm pivot.

Mike

Title: Re: Breva 750 Neutral Switch Replacement
Post by: guzzisteve on May 23, 2015, 05:25:05 AM

Gives you room to get your hand in there and remove it w/o cutting up your wrist.