Wildguzzi.com

General Category => General Discussion => Topic started by: guzzig5 on June 25, 2015, 03:05:00 PM

Title: cant find bearing !!
Post by: guzzig5 on June 25, 2015, 03:05:00 PM

5 speed gearbox , main /cluster shaft
Front of transmission (MG# 92256218):
17 mm ID × 35 mm OD × 15 mm wide - this is a needle bearing
Durkopp 10-2762
RIV NAS 17
Torrington 10-2762
Timken 10-2762

Where can I find one of these ? Also could I swap this out for a single roll ball ?

Title: Re: cant find bearing !!
Post by: guzzig5 on June 25, 2015, 03:22:42 PM

Looks like harper has one for 78 dollars . yikes !

Title: Re: cant find bearing !!
Post by: Antietam Classic Cycle on June 25, 2015, 03:50:04 PM

$59.18

http://www.mgcycle.com/index.php?main_page=product_info&cPath=55&products_id=1436

Title: Re: cant find bearing !!
Post by: Vasco DG on June 25, 2015, 04:39:37 PM

Note that the bearing has an oil gallery around the outside and there are drillings to allow the ingress of oil through these to the needles. You can get a MUCH cheaper, dimensionally identical bearing that doesn't have the gallery and drillings. It won't last very long. Also do NOT use bearing mount when installing!

Title: Re: cant find bearing !!
Post by: Chuck in Indiana on June 25, 2015, 04:49:42 PM

I'm too lazy to look, but have you tried Motion Industries?

Title: Re: cant find bearing !!
Post by: Antietam Classic Cycle on June 25, 2015, 05:38:04 PM

Quote from: Chuck in Indiana on June 25, 2015, 04:49:42 PM

I'm too lazy to look, but have you tried Motion Industries?

I haven't tried Motion figuring that if Emerson Bearing can't get it for me, then neither will they. Might be something that Peters Bearings in Germany could supply, but would most likely cost the same with shipping.

Title: Re: cant find bearing !!
Post by: Antietam Classic Cycle on June 25, 2015, 05:46:36 PM

$37.80 (+ shipping from Germany) at Stein Dinse:
http://www.stein-dinse.biz/Moto-Guzzi/Bearings/gear-box-bearing-10-2762-big-models::1539.html

$35.06 (+ shipping from Germany) at HMB:
http://www.hmb-guzzi.de/shop/Gearbox/Bearings/Needle-bearing-input-and-layshaft-5-speed-gearbox.html

Title: Re: cant find bearing !!
Post by: RinkRat II on June 25, 2015, 05:47:31 PM

 Kaman if  Motion doesn't have it . :popcorn:

    Paul :boozing: