Wildguzzi.com
General Category => General Discussion => Topic started by: boatdetective on July 11, 2015, 01:39:37 PM
-
Hello- So I have IAW 15 writer v. 2.6 open-
- I click to browse for my new map
-my file directory pops up
-I click on the file folder with my Guzzidiag stuff and other maps
...and no files pop up when I click on the folder. Nada- zip. I have at least three .bin files in there
Any guesses?
BTW- I only have COM3 popping up as a selection for input ports.
-
You need the IAW5xWriter. 07 Sport has a 5AM ECU. :thumb:
15x writer won't see 5AM maps. They are a different size.
-
thanks Beetle- I kindov figured it out on my own with the other writer. I loaded the map you sent me. BTW, the file you sent is "Sport FU2-4V-E3F2.2015.01.15.bin". My bike is a 2V- is your map for the 4V Breva Sport?
I reset the TPS. It will only reset to 4.8. I reset the auto learning function. I alo removed tte "O2 Opimizer" he bike now has a problem dying at itle (sometimes) and pops on the decel.
Any ideas?
-
No, that's a 2V map. 4.8 TPS is fine. Try adjusting CO trim to +3 or +5.
-
Also have you re-set the self learning parameters? If not, do so.
Pete
-
Also have you re-set the self learning parameters? If not, do so.
Pete
Yes sir. Thanks.
It has taken me a bit, but on the whole I'm a believer that the pretty basic injection system on these bikes is worlds easier to deal with than carbs (I know- heresy to the suspenders crowd)
-
I always use the reader first to read the current map and set aside the original bin file. It is a good idea in case you need to restore it. That also give you a good feeling that the communications is solid, before doing the write.