Wildguzzi.com

General Category => General Discussion => Topic started by: radguzzi on August 04, 2015, 06:53:06 PM

Title: "Not" Gonna Crash Bar bolt size...? 1100 California Tonti.
Post by: radguzzi on August 04, 2015, 06:53:06 PM: I want to order a Not gonna crash bar for the V11 Jackal but I do not see the bolts on MGCycles' site...

Anyone here happen to know the size of the Allens that are the Lower/Front frame connection where the guards attach...? Diameter/thread and length...

Thanks,
Rob
Title: Re: "Not" Gonna Crash Bar bolt size...? 1100 California Tonti.
Post by: guzzisteve on August 04, 2015, 07:53:45 PM: Book says 12mm x 1.25 pitch no length
Title: Re: "Not" Gonna Crash Bar bolt size...? 1100 California Tonti.
Post by: radguzzi on August 04, 2015, 08:32:24 PM: Quote from: guzzisteve on August 04, 2015, 07:53:45 PM

Book says 12mm x 1.25 pitch no length

Great, thanks. I can measure the required length, the thread is the big issue.

Thanks Steve,
Rob
Title: Re: "Not" Gonna Crash Bar bolt size...? 1100 California Tonti.
Post by: radguzzi on August 05, 2015, 08:01:32 AM: Do the bars also require a spacer or distance piece at the lower mounting point...?

Thanks,
rd
Title: Re: "Not" Gonna Crash Bar bolt size...? 1100 California Tonti.
Post by: twhitaker on August 05, 2015, 08:13:08 AM: No spacer needed but the bolt goes into a hex nut on the back side of the frame rail.
Title: Re: "Not" Gonna Crash Bar bolt size...? 1100 California Tonti.
Post by: radguzzi on August 05, 2015, 08:24:35 AM: Quote from: twhitaker on August 05, 2015, 08:13:08 AM
No spacer needed but the bolt goes into a hex nut on the back side of the frame rail.

Right, I know about the nut and star washer, I was thinking there is a collar or spacer for some reason... :undecided:

Thanks Terry...
Title: Re: "Not" Gonna Crash Bar bolt size...? 1100 California Tonti.
Post by: twhitaker on August 05, 2015, 09:20:10 AM: Quote from: radguzzi on August 05, 2015, 08:24:35 AM
I was thinking there is a collar or spacer for some reason...

I think you are right.
Title: Re: "Not" Gonna Crash Bar bolt size...? 1100 California Tonti.
Post by: twhitaker on August 05, 2015, 11:20:32 AM: I went to the bike at lunch to eyeball the screw length. My 'poorly calibrated' eyes suggested the screw length is 50mm and there are what appear to be bushings between the crash bar and the frame legs.
Title: Re: "Not" Gonna Crash Bar bolt size...? 1100 California Tonti.
Post by: radguzzi on August 05, 2015, 03:12:05 PM: Quote from: twhitaker on August 05, 2015, 11:20:32 AM
I went to the bike at lunch to eyeball the screw length. My 'poorly calibrated' eyes suggested the screw length is 50mm and there are what appear to be bushings between the crash bar and the frame legs.

Well thanks... 50MM does ring a bell.

Appreciate that.

rd