Wildguzzi.com

General Category => General Discussion => Topic started by: chrisk on August 25, 2015, 03:25:45 PM

Title: V50 fork damper removal
Post by: chrisk on August 25, 2015, 03:25:45 PM

Hi, how do I get the end cap off, is it threaded, just pushed in etc? It's really tight and I want to be sure before I start added too much force.

(https://lh3.googleusercontent.com/-wk6bEhYz02A/VdzNir5z1DI/AAAAAAAAAks/Pj04p13trNQ/s2048-Ic42/image.jpg)

Title: Re: V50 fork damper removal
Post by: chrisk on August 26, 2015, 03:30:28 AM

Any ideas..?

Title: Re: V50 fork damper removal
Post by: John A on August 26, 2015, 04:05:58 AM

I don't remember but your vice grip are on backwards for loosening. The hinged side should be against the rotation. Those are on there for tightening.

Title: Re: V50 fork damper removal
Post by: boatdetective on August 26, 2015, 02:26:04 PM

As I recall, that damper is sealed- there's no getting into it. You just attach the rod and spring to the end if memory serves.

Title: Re: V50 fork damper removal
Post by: Curtis Harper on August 26, 2015, 02:27:14 PM

Id does not come off, it is not a serviceable unit'