Wildguzzi.com

General Category => General Discussion => Topic started by: ritratto on October 03, 2015, 11:33:15 AM

Title: Question for CX100/ 1000 SP owners.
Post by: ritratto on October 03, 2015, 11:33:15 AM

I am in the middle of building a custom bike and bought a pair of foot peg brackets off of fleabay and after getting it all set up, I realized that someone had shortened them.
So my question is, what is the total length of the bracket? End to end?
The front (rider peg) is where it was cut and rewelded.So I will cut, extend and reweld to the correct length, making the shift/brake pedals work correctly. Or if anyone has the uncut originals they might be willing to part with, even better.
Thanks in advance for any replays.

Ted

Title: Re: Question for CX100/ 1000 SP owners.
Post by: Guzzistajohn on October 03, 2015, 12:08:34 PM

Quote from: ritratto on October 03, 2015, 11:33:15 AM

I am in the middle of building a custom bike and bought a pair of foot peg brackets off of fleabay and after getting it all set up, I realized that someone had shortened them.
So my question is, what is the total length of the bracket? End to end?
The front (rider peg) is where it was cut and rewelded.So I will cut, extend and reweld to the correct length, making the shift/brake pedals work correctly. Or if anyone has the uncut originals they might be willing to part with, even better.
Thanks in advance for any replays.

Ted

Don't have any to sell, but this might help :grin:
(http://i1299.photobucket.com/albums/ag65/guzzistajohn/pegs%20001_zpswevlze5d.jpg) (http://s1299.photobucket.com/user/guzzistajohn/media/pegs%20001_zpswevlze5d.jpg.html)

Title: Re: Question for CX100/ 1000 SP owners.
Post by: ritratto on October 03, 2015, 12:11:30 PM

So, John, what is the total then?

Title: Re: Question for CX100/ 1000 SP owners.
Post by: Arizona Wayne on October 03, 2015, 12:20:22 PM

The total bracket length end to end is 13.5"   :wink:

Title: Re: Question for CX100/ 1000 SP owners.
Post by: ritratto on October 03, 2015, 12:24:46 PM

Wow! Two inches were cut out!  :undecided:

Title: Re: Question for CX100/ 1000 SP owners.
Post by: Arizona Wayne on October 03, 2015, 12:37:12 PM

Quote from: ritratto on October 03, 2015, 12:24:46 PM

Wow! Two inches were cut out!  :undecided:

The back pegs are for the passenger, but I use them on straights for more leg room(30") too when solo riding.

Title: Re: Question for CX100/ 1000 SP owners.
Post by: ritratto on October 03, 2015, 06:51:37 PM

 Thanks Wayne and John.... I took them to a friends shop with a piece of 3/8" pipe ( 17mm compared with 18mm on the bracket)  and a couple hours later, Bingo, back to stock!

Loving the forum again!  :grin:

Title: Re: Question for CX100/ 1000 SP owners.
Post by: Guzzistajohn on October 03, 2015, 06:59:53 PM

Sorry stepped out glad you could chime in uncle wayne