Wildguzzi.com

General Category => General Discussion => Topic started by: pikipiki on October 11, 2015, 01:46:00 PM

Title: V7 classic question
Post by: pikipiki on October 11, 2015, 01:46:00 PM
Can I ask how many bolts hold on the rear fender? Apart from 5 small bolts there are 2 holes each side for big bolts that also hold grab rails. I assume only 2 of these holes are used one each side as you see here. (dome head nut on inside of fender)


(http://s4.postimg.org/nspfnrwd9/IMG_20151011_192650.jpg)

Also there are two threaded holes in the frame under seat, are these holes used for anything? I stuck a bolt in one for the photo.

(http://s27.postimg.org/eqa32jgtv/IMG_20151011_192753.jpg)
Title: Re: V7 classic question
Post by: pikipiki on October 11, 2015, 03:10:46 PM
5 small bolts one at the very back can be seen in picture 1,
2 big bolt in picture 1 but possibility to fit 2 more.
2 small bolts can be seen in pic 2 and 2 more lower down.

So 7 bolts

Do you have the extra bolt holes unused?