Wildguzzi.com

General Category => General Discussion => Topic started by: ritratto on October 24, 2015, 06:30:05 PM

Title: Anyone have any upswept mufflers for a round head tonti?
Post by: ritratto on October 24, 2015, 06:30:05 PM: Building a custom bike and have put 1000SP peg brackets on and looking for some mufflers that will fit the look better than the stock pipes.
Title: Re: Anyone have any upswept mufflers for a round head tonti?
Post by: jabberwocky on October 24, 2015, 08:05:30 PM: I've seen some Mistrals that are upswept and look and sound great. Not cheap though. I'll be interested to hear if there's anything else.
Title: Re: Anyone have any upswept mufflers for a round head tonti?
Post by: Kent in Upstate NY on October 24, 2015, 08:46:34 PM: Try MG Cycle. Good guys. http://www.mgcycle.com/index.php?main_page=index&cPath=26_105
Title: Re: Anyone have any upswept mufflers for a round head tonti?
Post by: ritratto on October 24, 2015, 09:44:34 PM: I am aware of the two options mentioned, but am hoping for Lafranconi or something made for Guzzi.

Is anyone aware of the quality of Sito mufflers?
Title: Re: Anyone have any upswept mufflers for a round head tonti?
Post by: Antietam Classic Cycle on October 24, 2015, 09:53:09 PM: http://www.hmb-guzzi.de/shop/Exhaust/Mufflers/Muffler-set-Lafranconi-Competitione--chrome--38-40mm--LM-1--LM-2.html

(http://www.hmb-guzzi.de/shop/images/product_images/info_images/001_b_7315_0.jpg)

http://www.hmb-guzzi.de/shop/Exhaust/Mufflers/Muffler-set-Lafranconi-Competitione--LM-1--LM-2.html

(http://www.hmb-guzzi.de/shop/images/product_images/info_images/1388_0.jpg)
Title: Re: Anyone have any upswept mufflers for a round head tonti?
Post by: smdl on October 24, 2015, 10:43:23 PM: I have a brand new set of chrome Lafranconi Competiziones that are superfluous to requirements, as they say. I bought them for my 750S tribute bike, and subsequently decided to go with a Mistral system. I was planning to hang onto them for a someday project, but really can't see something like that unfolding in the short term, and I could really use the funds for a new exhaust system for my police Eldo. PM if interested.

Cheers,
Shaun
Title: Re: Anyone have any upswept mufflers for a round head tonti?
Post by: ritratto on October 25, 2015, 09:48:45 AM: Bump!
Title: Re: Anyone have any upswept mufflers for a round head tonti?
Post by: blackcat on October 25, 2015, 09:58:51 AM: (http://i147.photobucket.com/albums/r317/blackkat-1/DSC00231-1.jpg)

Mistrals.
http://www.mgcycle.com/index.php?main_page=product_info&cPath=26_105&products_id=2548
Title: Re: Anyone have any upswept mufflers for a round head tonti?
Post by: trumps on October 26, 2015, 12:25:26 AM: Try Hartmut at HT Moto, I bought this set through him, they are a lovely set of pipes.
(http://i1110.photobucket.com/albums/h442/trumps1973/Guzzi/RSK_6510_zpsfec8llby.jpg) (http://s1110.photobucket.com/user/trumps1973/media/Guzzi/RSK_6510_zpsfec8llby.jpg.html)
Title: Re: Anyone have any upswept mufflers for a round head tonti?
Post by: ritratto on October 26, 2015, 12:58:21 PM: bump again
Title: Re: Anyone have any upswept mufflers for a round head tonti?
Post by: ritratto on October 26, 2015, 03:16:07 PM: So, here is the bike as of today. Hoping for something fitting to my idea. Have already spent a lot of ducets so far and hoping someone can help with something not too dear.

(http://i267.photobucket.com/albums/ii293/ritratto/image.jpeg) (http://s267.photobucket.com/user/ritratto/media/image.jpeg.html)
Title: Re: Anyone have any upswept mufflers for a round head tonti?
Post by: Pancake on October 26, 2015, 04:37:21 PM: Quote from: ritratto on October 26, 2015, 03:16:07 PM
So, here is the bike as of today. Hoping for something fitting to my idea. Have already spent a lot of ducets so far and hoping someone can help with something not too dear.

(http://i267.photobucket.com/albums/ii293/ritratto/image.jpeg) (http://s267.photobucket.com/user/ritratto/media/image.jpeg.html)

I have recently fitted some of these: http://www.stein-dinse.biz/Le-Mans/Mistral/Mistral-Ausp-Satz-LM-1-2-VA-konisch-EG-ABE::13735.html
I'm very pleased with the fit and quality. I got the balance pipe too which is slightly upswept. The whole thing fitted perfectly with the LM3 footrest hangers I have on my SP2
Title: Re: Anyone have any upswept mufflers for a round head tonti?
Post by: Antietam Classic Cycle on October 26, 2015, 04:40:12 PM: The key words seem to be "not too dear" as in "not expensive". That leaves anything of good quality out... :wink:
Title: Re: Anyone have any upswept mufflers for a round head tonti?
Post by: ritratto on October 26, 2015, 05:00:48 PM: Quote from: Antietam Classic Cycle on October 26, 2015, 04:40:12 PM
The key words seem to be "not too dear" as in "not expensive". That leaves anything of good quality out... :wink:
Title: Re: Anyone have any upswept mufflers for a round head tonti?
Post by: Cam3512 on October 26, 2015, 05:03:54 PM: Very nice bike. Shame to put on some beat up cheapos after you've gone this far.
Title: Re: Anyone have any upswept mufflers for a round head tonti?
Post by: ritratto on October 26, 2015, 05:07:40 PM: Quote from: Antietam Classic Cycle on October 26, 2015, 04:40:12 PM
The key words seem to be "not too dear" as in "not expensive". That leaves anything of good quality out... :wink:

Well Charlie, the head pipes and crossover are new, so compititizioni are too loud and mistrals need all I have already bought out of the question. What else fits the stock three pieces?
Title: Re: Anyone have any upswept mufflers for a round head tonti?
Post by: ritratto on October 26, 2015, 05:19:30 PM: Pancake.....did these fit the stock crossover? Do you have a photo on your bike? And how loud are they?
Title: Re: Anyone have any upswept mufflers for a round head tonti?
Post by: jvb on October 26, 2015, 07:25:12 PM: Nice Bike.

I fitted a up-swept pipe designed for the SP to my T4.
So a few things:
The foot pegs will have to be bent up out of the way, or replaced with foot pegs similar to the SP's as there is not enough room under the passenger foot-peg to allow fitting.

The mounting on the muffler is further to the rear so will require an extension from the passenger foot-peg or fabrication of a strut from the frame.

I also fitted the cross piece for the SP as the original cross over allowed the first part of the muffler, before the up-sweep, to hang down slightly . The SP H piece has a slight bend which levels out the first section of the pipe.

(http://)

Stein Dinse Australia might have the pipe you are looking for. They have them manufactured through http://www.dropbears.com/o/overlander/euro.htm

I tried to attach a copy of a photo - see how it goes.