Wildguzzi.com

General Category => General Discussion => Topic started by: rbond on November 10, 2015, 02:12:29 PM

Title: 2012 V7C parts
Post by: rbond on November 10, 2015, 02:12:29 PM

Does anyone know where else I can get part number- 32605511? This is from MGcycle. I assume it is a Guzzi number, if not, it is a clutch lever for the handlebar. I have dropped this bike only twice and the lever breaks. At $25.00 a pop, a cheaper alternative would be nice.

Title: Re: 2012 V7C parts
Post by: pyoungbl on November 10, 2015, 02:38:50 PM

$25 is pretty cheap for a motorcycle part these days.  You might find someone who has upgraded and will sell the OEM part...good luck.

Peter Y.

Title: Re: 2012 V7C parts
Post by: Perazzimx14 on November 10, 2015, 06:50:48 PM

Years back I bought a Chinese knock set of Pazzo levers for my Griso off of EBay for cheap. The knockoff levers, levered just as good at the Pazzo's at about 20% of the cost. There are many options on EBay for the V7 that will work. But as Pyoungbly stated $25 for a lever isn't a lot of money.

Thinking about it if the only damage you are cause dropping the bike is a $25 lever you are very lucky to get away that inexpensively.

Title: Re: 2012 V7C parts
Post by: rocker59 on November 10, 2015, 06:53:25 PM

Quote from: pyoungbl on November 10, 2015, 02:38:50 PM

$25 is pretty cheap for a motorcycle part these days.  You might find someone who has upgraded and will sell the OEM part...good luck.

Peter Y.

 :1:

Title: Re: 2012 V7C parts
Post by: sign216 on November 10, 2015, 07:00:54 PM

I agree with everyone.  $25 is a good price.  I got some inexpensive aftermarket levers, and they were more than that.

Just go with it and roll on.

Title: Re: 2012 V7C parts
Post by: O on November 11, 2015, 08:27:10 AM

Here you go, from the Swap Meet section here on WG:

http://wildguzzi.com/forum/index.php?topic=77145.0

For what it's worth, I've dealt with Sam before, he's a good guy.