Wildguzzi.com

General Category => General Discussion => Topic started by: Enderw88 on January 14, 2016, 07:56:58 PM

Title: 1100 Sport Peg Plate Changes
Post by: Enderw88 on January 14, 2016, 07:56:58 PM
Does anyone know which specific year of 1100 sport had this peg plate (porkchop)?

(http://moto.zombdrive.com/images/moto-guzzi-1100-sport-1.jpg)

This version notably does not have the extension to the rear to support the subframe.
Title: Re: 1100 Sport Peg Plate Changes
Post by: Vasco DG on January 14, 2016, 10:01:39 PM
The pork chops with the 'ole in the middle and rough cast appearance were only used on the Carb models. The 'IE' used the polished pork chops with no hole.

pete
Title: Re: 1100 Sport Peg Plate Changes
Post by: rocker59 on January 14, 2016, 10:25:35 PM
Yep.  Carb models.  1994-1996.
Title: Re: 1100 Sport Peg Plate Changes
Post by: yogidozer on January 14, 2016, 10:56:38 PM
and despite what others say about putting a sandwich in the opening, there is a super stable stand that uses the opening, with a removable "pipe" that slips in there
Title: Re: 1100 Sport Peg Plate Changes
Post by: rocker59 on January 15, 2016, 08:19:16 AM
I really like that rear seat cowl with bum stop!

Any idea who made it ?
Title: Re: 1100 Sport Peg Plate Changes
Post by: twhitaker on January 15, 2016, 08:31:11 AM
I like the pleasing color of the rocker covers.  :thumb:
Title: Re: 1100 Sport Peg Plate Changes
Post by: pauldaytona on January 15, 2016, 05:42:35 PM
This and the later sport 1100i ones are not direct interchangeable. Because the sporti is 40mm narrower at the top mount. You could put these on the 1100i if you put two 20mm distance pieces between. Then it still doesn't have the mounts for rear frame.
Title: Re: 1100 Sport Peg Plate Changes
Post by: Enderw88 on January 16, 2016, 04:18:36 PM
The pork chops with the 'ole in the middle and rough cast appearance were only used on the Carb models. The 'IE' used the polished pork chops with no hole.

pete

Perfect, thanks.