Wildguzzi.com
General Category => General Discussion => Topic started by: Kiwi_Roy on January 25, 2016, 05:31:03 PM
-
Anyone have a set of these laying around, My brother Kevin needs some. he can get them made up $100 for a rubber $200 for a braided I thought someone might have them laying around or know who stocks them.
We can't get to look at the bike at the moment so need to know if it's a fit for that model. Its a 96 California
(http://i1304.photobucket.com/albums/s526/Kiwi_Roy/Kevins%20Califronia/Guzzi2_zpssn4z21e8.jpg)
Thanks
Roy
-
Hi Roy
Greg Distributor's will make exact copies for cheap. I got six made for around $250.00, 1 day service.
-
Anyone have a set of these laying around, My brother Kevin needs some. he can get them made up $100 for a rubber $200 for a braided I thought someone might have them laying around or know who stocks them.
We can't get to look at the bike at the moment so need to know if it's a fit for that model. Its a 76 California
(http://i1304.photobucket.com/albums/s526/Kiwi_Roy/Kevins%20Califronia/Guzzi2_zpssn4z21e8.jpg)
76 ?????
Looks identical to the 96.
I made mine from SS hose parts.
-
Jim, the trouble is we don't have one to copy, He's in Taupo, the bike is in Auckland.
He's done a phenomenal job rounding up a pair of bikes for our New Zealand trip (Ross & I), I thought getting some hoses might help even the score.
I don't see them at MG Cycle
Who are Greg Distributors, I'm not familiar with them.
-
Thanks Wayne, they were still string and sticks back then :boozing:
As I said earlier the trouble is getting the dimensions, banjo size, angles etc.
I thought someone may have parted one out.
That's $100/$200 for one hose BTW
Update, it seems like just the LH front needs replacing with a braid, if someone could tell me the parts I need and a sketch of the angles involved I will try to source them here in Vancouver. We need the screw on variety I guess, haven't done hoses before.
Thanks
Roy
-
Goodridge has pre-assembled kits. Not sure if for that bike but had them for my 89 Mille!
Brian
-
If someone has one of these bikes a picture of both ends of the Left hand hose would be most appreciated. hose length end to end, what size wrench fits the nuts etc.
Thanks
-
find a local shop. Bring them the stock lines.
They'll make stainless lines for a about $40 per.
or just order them from Harpers $175
https://www.harpermoto.com/1100-california-brake-line-kit.html
-
I keep telling you guys
I don't have the parts in hand
Why don't you listen to me :thewife:
Haha
-
Jim, the trouble is we don't have one to copy, He's in Taupo, the bike is in Auckland.
He's done a phenomenal job rounding up a pair of bikes for our New Zealand trip (Ross & I), I thought getting some hoses might help even the score.
I don't see them at MG Cycle
Who are Greg Distributors, I'm not familiar with them.
Greg's is a massive distributor of all things auto / industrial, they have branches in BC.
I have some extras made for a T3, not sure they would be the same for your bike, if you think they would work I could send the front pair to you.
-
probably the same as a 98 EV, I might have old used rubber take off's .. do you need the whole line from the splitter under the saddle to the caliper?
-
I keep telling you guys
I don't have the parts in hand
Why don't you listen to me :thewife:
Haha
The Green Acres effect at work Roy :laugh:
Dusty
-
I just bought a complete set from Harper's for my 90 Cal III touring. Speigler sent hoses for a 94 Cal III.
Curtis had em make good on it, I sent my hoses and they duplicated them and the are BETTER than stock as the OEM rubbed the fender.
They are purdy, too!
-
I keep telling you guys
I don't have the parts in hand
Why don't you listen to me :thewife:
Haha
And I also posted:
or just order them from Harpers $175
https://www.harpermoto.com/1100-california-brake-line-kit.html
-
And I also posted:
or just order them from Harpers $175
https://www.harpermoto.com/1100-california-brake-line-kit.html
That's what I'm talking about :drool: Any Guzzi would be proud of a set of those. Thanks for the link I will sent it off right away.
Thanks everyone for all the input. Sorry Charlie, Two Checks, I missed your recommendation, I guess LowRyter finally got my attention.
:bow: