Wildguzzi.com

General Category => General Discussion => Topic started by: dsrdave on January 27, 2016, 01:09:26 PM

Title: replacing clutch master cyl line on a griso ?????
Post by: dsrdave on January 27, 2016, 01:09:26 PM

I need to replace the clutch line on the Griso.  The access to the banjo bolt on the slave cyl is a problem.  Am I missing something ????   Is there a way to get good access to the clutch slave cyl. ???  Any help would be appreciated.  Thx, Dave.

Title: Re: replacing clutch master cyl line on a griso ?????
Post by: guzzisteve on January 27, 2016, 01:18:34 PM

The easiest way is pull back wheel & swingarm.

Title: Re: replacing clutch master cyl line on a griso ?????
Post by: leafman60 on January 27, 2016, 01:30:05 PM

Quote from: dsrdave on January 27, 2016, 01:09:26 PM

I need to replace the clutch line on the Griso.  The access to the banjo bolt on the slave cyl is a problem.  Am I missing something ????   Is there a way to get good access to the clutch slave cyl. ???  Any help would be appreciated.  Thx, Dave.

If you need a master cylinder, part number 978607, I have a brand new spare, never used, and I'll make you a good deal on it.

Title: Re: replacing clutch master cyl line on a griso ?????
Post by: dsrdave on January 27, 2016, 01:34:40 PM

I was afraid you were going to say that Steve.........  At least I get a chance to grease the swing arm pivot.  Thx, Dave.

Title: Re: replacing clutch master cyl line on a griso ?????
Post by: guzzisteve on January 27, 2016, 01:44:47 PM

You could dig strait down under seat & airbox but may still have to get more room in the end.

Title: Re: replacing clutch master cyl line on a griso ?????
Post by: dsrdave on January 27, 2016, 02:02:53 PM

I tried going down  under the air box but that didn't help.  Looks like pulling the swing arm.