Wildguzzi.com

General Category => General Discussion => Topic started by: Tom H on February 17, 2016, 03:45:21 PM

Title: 2004 Cali EVT. Brembo Front MC Banjo Bolt Thread?
Post by: Tom H on February 17, 2016, 03:45:21 PM

I know that the brake line banjo bolt is 10mm on the front MC. What is the pitch? From what I could tell on MG Cycle, it could be 1.25 or 1.0. Most likely 1.0.

Anyone know for sure? I hate to bleed my brakes just to find the thread pitch.

I'm thinking of getting serious and delinking my brakes. I'm looking at what I need to do it and how much.

Thank you!
Tom

Title: Re: 2004 Cali EVT. Brembo Front MC Banjo Bolt Thread?
Post by: bsanut on February 17, 2016, 07:26:47 PM

1.0 for Brembo.

Unless fitted to Japanese, then usually 1.25.

Joe

Title: Re: 2004 Cali EVT. Brembo Front MC Banjo Bolt Thread?
Post by: Tom H on February 17, 2016, 08:40:44 PM

It has a B stamped on the lever if I remember right. The bike is stock so it should be the Brembo.

Thanks for the answer!
Tom

BTW: I have seen your username on fleabay. Are you the same? And if so, did you list some air slides for the old VHB29 carbs a bit ago?