Wildguzzi.com

General Category => General Discussion => Topic started by: harrytief on March 14, 2016, 10:47:01 AM

Title: transmission needle roller bearing
Post by: harrytief on March 14, 2016, 10:47:01 AM

I am replacing the needle roller bearings in the transmission of my eldo build but no bearing house in the greater Toronto area has heard of bearing #10-2762. These are the bearings that position the clutch output shaft and are 17mm by 35mm by 15mm in size. Guzzi parts are SLOW to arrive so does anyone have an alternate bearing number or source that I can try. I need two sets.
Thanks
Harry

Title: Re: transmission needle roller bearing
Post by: Antietam Classic Cycle on March 14, 2016, 12:49:37 PM

This one?
http://www.mgcycle.com/index.php?main_page=product_info&cPath=55&products_id=1436
http://www.harpermoto.com/03-roller-bearing-17x35x15.html

Check with these folks: http://www.emersonbearing.com/

From Greg Bender's website:
Rear of transmission (MG# 92256218):
17 mm ID x 35 mm OD x 15 mm wide - this is a needle bearing
Durkopp 10-2762
RIV NAS 17
Torrington 10-2762
Timken 10-2762

Title: Re: transmission needle roller bearing
Post by: canuck750 on March 14, 2016, 05:46:21 PM

HMB sells a complete kits of six transmission bearings for a reasonable price.

Title: Re: transmission needle roller bearing
Post by: JoeW on March 14, 2016, 07:21:16 PM

I have searched several times and have not found a generic equivalent. Harper's or MG is where I get them when needed.

Title: Re: transmission needle roller bearing
Post by: harrytief on March 14, 2016, 09:24:02 PM

Thanks Joe and Charlie. I'll call MG cycle in the morning.
Harry