Wildguzzi.com

General Category => General Discussion => Topic started by: breva750 on March 28, 2016, 05:36:45 PM

Title: breva 750 dipstick length
Post by: breva750 on March 28, 2016, 05:36:45 PM

I would appreciate dimensions as I am fabricating a replacement....

Title: Re: breva 750 dipstick length
Post by: sign216 on March 28, 2016, 05:56:28 PM

I remind you that in 2003 there was change by the factory, shortening the stick Full mark by 10mm.
This was to lower the oil level slightly, to reduce oil taken up by the air box.

Ironically , I don't know the overall length, just that it was shortened a little.

Title: Re: breva 750 dipstick length
Post by: breva750 on March 28, 2016, 06:03:01 PM

mine is 2004 (thanks for that)

Title: Re: breva 750 dipstick length
Post by: Hugh Straub on March 28, 2016, 08:01:36 PM

My 2006 dip stick:

length from screw cap bottom to stick end - 131.1mm/5.16in

from bottom of stick to low level mark - 13.6mm/.53in

from bottom of stick to high level mark - 32.0mm/1.26 in

2003 service bulletin says don't fill with oil more than 10-11mm below high level mark (say 22mm from stick bottom)

Hope this helps.

Kind regards