Wildguzzi.com

General Category => General Discussion => Topic started by: kingoffleece on June 13, 2016, 08:39:40 PM

Title: Have you put Goldwing pegs on your Norge?
Post by: kingoffleece on June 13, 2016, 08:39:40 PM

And if so, what was involved?
I ask because I've been getting asked a lot about adding height to the Norge seat.
I've been adding one inch but I got a wild hair going so I'm working on a 3 inch rise for a very tall rider.  I thought a combo of pegs and seat might be best for him.

I realize there are some drop pegs already available but this rider wants the rubber foot pad area as opposed to bare metal.

THX
Jim

Title: Re: Have you put Goldwing pegs on your Norge?
Post by: guzzi ride on June 13, 2016, 08:53:15 PM

I,ve got them on mine. Very easy to switch out, I did have to drill a small hole on the R side ? for the return spring.

Title: Re: Have you put Goldwing pegs on your Norge?
Post by: Adk.IBO on June 13, 2016, 09:01:38 PM

Yup, I've got them. Changed out to the euro side stand to make it work for me. Did not drill anything but if I remember right I used the GW springs... At 5'3" I sure did not need any extra height in the seat but I was experiencing a smidgeon of hip pain and the GW pegs cured it.

Title: Re: Have you put Goldwing pegs on your Norge?
Post by: toolittletime on June 13, 2016, 11:53:06 PM

I put them on mine.....easy install...no drilling.

Tim

Title: Re: Have you put Goldwing pegs on your Norge?
Post by: tris on June 14, 2016, 12:51:01 AM

I would fit 'em if I could lay my sticky little paws on a pair

Title: Re: Have you put Goldwing pegs on your Norge?
Post by: Dean Rose on June 14, 2016, 06:06:27 AM

Quote from: tris on June 14, 2016, 12:51:01 AM

I would fit 'em if I could lay my sticky little paws on a pair

You know Honda sells them.  :smiley:

Dean

Title: Re: Have you put Goldwing pegs on your Norge?
Post by: tris on June 14, 2016, 06:13:51 AM

Quote from: Dean Rose on June 14, 2016, 06:06:27 AM

You know Honda sells them.  :smiley:

Dean

 :bow: I know but I'm a tight arse!  :wink:

That's being said Dean, you don't know the part number off hand do you

Cheers

EDIT
Stand fast - I found it
Peg plus rubber & bits comes in at about £90 A SIDE!!
I'll keep on watching on Ebay/Gumtree/Etc. I think

Title: Re: Have you put Goldwing pegs on your Norge?
Post by: John Ulrich on June 14, 2016, 07:00:46 AM

You can look up the numbers.....
http://www.hondapartshouse.com/oemparts/a/hon/5053ec93f870021c54be43e4/step

Title: Re: Have you put Goldwing pegs on your Norge?
Post by: Huzo on June 14, 2016, 10:09:11 AM

I'd like to put some on my '07, but I'm still trying to wear out the original ones, I think I'm about half way there !

Title: Re: Have you put Goldwing pegs on your Norge?
Post by: bigbikerrick on June 14, 2016, 02:27:26 PM

Are these the footpegs from the GL 1800?  If so , I believe a have a few pairs in my parts  stash.
Rick.

Title: Re: Have you put Goldwing pegs on your Norge?
Post by: tris on June 14, 2016, 03:19:35 PM

I believe it is Rick