Wildguzzi.com

General Category => General Discussion => Topic started by: jas67 on June 24, 2016, 07:29:36 PM

Title: NGC: M16x1.0mm nut needed for Ducati single engine sprocket.
Post by: jas67 on June 24, 2016, 07:29:36 PM: Sorry for the non-Guzzi content, but, there are a fair number here that are fans of other Italian motorcycles as well.

I have a 1966 250 Monza that is missing the nut that holds the countersprocket on the output shaft of the transmission.

It is an M16 with a 1.0mm pitch thread. I tried the usual suspects, McMaster-Carr, MSC Industrial, Bolt Depot, etc. 1.5mm seems to be the finest thread any of them have on an M16.

Does anyone here have any idea where I can source this nut?
Title: Re: NGC: M16x1.0mm nut needed for Ducati single engine sprocket.
Post by: sib on June 24, 2016, 08:00:54 PM: A non-exhaustive web search turns up:

http://www.partsatv.com/NUT-M16X1-00-p/ssr200-129.htm
https://www.amazon.com/Universal-Parts-M16x1-50-Nut/dp/B00H4G7LPK
http://www.ktm-parts.com/AOMC/product/8A0031386

I'm sure there are many more sources
Title: Re: NGC: M16x1.0mm nut needed for Ducati single engine sprocket.
Post by: Moto on June 24, 2016, 08:04:45 PM: Here are some M16x1.0 nuts for sale:

http://www.newark.com/schurter/98-9206/accs-m16x1-nut-steel-zinc-pl-sealing/dp/24B1398 (http://www.newark.com/schurter/98-9206/accs-m16x1-nut-steel-zinc-pl-sealing/dp/24B1398)

http://racetechtitanium.com/shop/index.php?main_page=products_new&disp_order=1&page=48 (http://racetechtitanium.com/shop/index.php?main_page=products_new&disp_order=1&page=48)

http://www.ebay.com/itm/Clutch-Nut-M16x1-0-Flange-Nut-UTV-HISUN-MASSIMO-SUPERMACH-UTV400-UTV700-MSU500-/351501473327 (http://www.ebay.com/itm/Clutch-Nut-M16x1-0-Flange-Nut-UTV-HISUN-MASSIMO-SUPERMACH-UTV400-UTV700-MSU500-/351501473327)

Moto

P.S. Secret google search string: "m16x1.0 nut price"
Title: Re: NGC: M16x1.0mm nut needed for Ducati single engine sprocket.
Post by: jas67 on June 25, 2016, 07:51:28 AM: Thank you both for the suggestions. I had actually found that ebay one right after my post.
A previous search of eBay yielded nothing.

The Amazon link in the first reply is a 1.5mm pitch nut.

Now I wait for the ebay nut to arrive.
Title: Re: NGC: M16x1.0mm nut needed for Ducati single engine sprocket.
Post by: Groover on June 25, 2016, 10:51:26 PM: I've had good luck finding nuts and bolts I couldn't find anywhere else at NAPA auto parts.
Title: Re: NGC: M16x1.0mm nut needed for Ducati single engine sprocket.
Post by: sib on June 26, 2016, 06:51:43 AM: I'm blessed by having a large, old, inner-city-type hardware store nearby that stocks a pretty extensive line of metric bolts, nuts, etc., primarily in stainless and black steel, but also some chrome plated steel. However, whenever I've needed something that the store doesn't stock, Bolt Depot has never failed me. https://www.boltdepot.com/Default.aspx
Title: Re: NGC: M16x1.0mm nut needed for Ducati single engine sprocket.
Post by: jas67 on June 27, 2016, 05:29:03 AM: Quote from: sib on June 26, 2016, 06:51:43 AM
I'm blessed by having a large, old, inner-city-type hardware store nearby that stocks a pretty extensive line of metric bolts, nuts, etc., primarily in stainless and black steel, but also some chrome plated steel. However, whenever I've needed something that the store doesn't stock, Bolt Depot has never failed me. https://www.boltdepot.com/Default.aspx

Bolt Depot was the first place I tried. They have regular course (M16x2.0mm) and fine (M16x1.5mm). M16x1.0mm, is special.

Luckily, as you pointed out in your previous post, there is a Husqvarna clutch nut that will fit. I have one on order.