Wildguzzi.com
General Category => General Discussion => Topic started by: chicagomike on July 08, 2016, 01:20:32 PM
-
My carb Sport mirrors suffer droop and no amount of superglue on the ball will fix it anymore. I've read that CBR600 & V11 LeMans mirrors both fit and work. Any other suggestions and/or pics so I could see what it looks like?
Thanks
Mike
-
I ditched mine and installed Napoleon bar ends. Rear vision is 1000% better.
-
I found some bar ends as well, I forget the brand but small, nicely made, and the clearest mirrors I've ever used. Plus they look way cooler, and I actually can see behind me instead of just seeing my arm.
-
yeah I've heard that Emgo aftermarket CBR 600 mirrors are the ticket.
I haven't measured, but I don't think the V11 mirrors have the same bolt pattern.
I'll try and check for you tonight or tomorrow, and let you know.
-
I replaced the mirrors on my LeMans with a set for a Buell about 12 years ago at about half the price from MG. Don't know which model Buell. The mounting is a pair of M6 studs spaced about 1 1/8 inches apart. They had a set with stalks about an inch longer.
-
yeah I've heard that Emgo aftermarket CBR 600 mirrors are the ticket.
Here they are on my bike: (photo credit to Bill Hagan from Jay's central PA ride thread)
(https://photos.smugmug.com/Palmyra-Pa-Just-Cause/n-Xgbk5d/i-g5Md6GC/0/1665x937/i-g5Md6GC-1665x937.jpg)
(https://photos.smugmug.com/Palmyra-Pa-Just-Cause/n-Xgbk5d/i-f7tqqLf/0/1665x937/i-f7tqqLf-1665x937.jpg)
Emgo part #20-87021&2 (left & right) listed for Honda CBR600, fit the Sport mounting perfectly. Don't get the ones for a CBR900, same bolt pattern but the stems for the 900 ones are several cm shorter so you get a better view of your elbows. :grin:
-
Since you're going to ditch them. Try some silicone goop and squeeze enough in to be a gasket. I usually turn mine down so that they look like hound dog ears.
-
Mike,
I fitted pattern CBR600 mirrors to my 1100 Sport Injection. They were model year 1998-2000 (90mm stems) and not expensive. These fit straight on with no drilling/messing about required. Pics below. I grew tired of always having to tuck in an elbow to see behind me.
(http://thumb.ibb.co/dun1gF/P1010368.jpg) (http://ibb.co/dun1gF)
(http://thumb.ibb.co/dAzE1F/P1010377.jpg) (http://ibb.co/dAzE1F)
(http://thumb.ibb.co/nBxZ1F/P1010380.jpg) (http://ibb.co/nBxZ1F)
-
Thanks all. I don't know why the system didn't send me an email notice about your comments so apologies for my delay in responding.