Wildguzzi.com
General Category => General Discussion => Topic started by: antmanbee on July 24, 2016, 03:57:14 PM
-
I ordered 3 blanks from http://www.mrlock.com/jma-zadi-motorcycle-key-blanks/jma-key-blank-zadi-zd23rcp-za-9-p1 (http://www.mrlock.com/jma-zadi-motorcycle-key-blanks/jma-key-blank-zadi-zd23rcp-za-9-p1) for $1.70 each plus about 4.50 shipping.
This is a list of other ones that should work. These are not verified but copied from cross references from other sites after my morning of research.
Ilco EZ TMC1
JMA ZA-9P1
Zadi Motorcycle Blank - SALS-ZA-9.P1
HD : ZD24RDP
HD Hook : XPT066
Ilco : ZAD20P
Errebi : ZA19RP144
CB Hook : P362
Bianchi ZAD20P key blank for most locks using this series.
JMA ZA-9.P,
JMA ZA-9P1,
Keyline ZAD18AP,
Silca ZD23RBP,
Silca ZD23RCP,
Silca ZD24RDP,
Silca ZD24RMH
Ilco TMC1,
Ilco X270,
Jet TMC1,
JMA TRP-1D
These keys have a Code Series 8001-9554, Which I think is the numerical code for cutting without copying from an existing key.
-
Thank you for your contribution to our knowledge base. We can use all the help we can get at times. May come in handy one day.
-
Received the key blanks and got them cut at Ace for a Dollar each.
Head of the blank is a little smaller than the original, but the length is the same.
I used the JMA ZA-9P1 blank.
(http://thumb.ibb.co/nuqzka/Guzzi_Key_Blank.jpg) (http://ibb.co/nuqzka)
-
Thanks. Good to have the option. :thumb: :thumb: