Wildguzzi.com

General Category => General Discussion => Topic started by: hannibal smith on September 30, 2016, 12:30:02 PM

Title: SC Products exhaust for V7 Classic
Post by: hannibal smith on September 30, 2016, 12:30:02 PM
Any experience with the SC 2 into 1 system?

Bike is a V7 Classic 2009

Re map? Plan to use DB insert, it's my commuter/don't wake the neighbors at the crack of dawn bike.
Title: Re: SC Products exhaust for V7 Classic
Post by: pete roper on September 30, 2016, 01:25:36 PM
SC? Never heard of them! Linky?
Title: Re: SC Products exhaust for V7 Classic
Post by: Kent in Upstate NY on September 30, 2016, 02:00:25 PM
http://www.sc-project.com/moto_guzzi_v7_e.htm (http://www.sc-project.com/moto_guzzi_v7_e.htm)(http://www.sc-project.com/prodotti/moto_guzzi/v7/guzzi_v7_auspuff_motoguzzi_v7_scproject_2__auspuff_v7_guzzi.jpg)
Title: Re: SC Products exhaust for V7 Classic
Post by: pete roper on September 30, 2016, 02:09:57 PM
A two into one system like that with a single lambda input is going to play havoc with the fueling. It'll run like a three legged, hairy, goat unless you build a custom map for it.

Pete
Title: Re: SC Products exhaust for V7 Classic
Post by: Andy1 on September 30, 2016, 03:12:28 PM
.......or take the lambdas out and plug the hole - worked just fine for me with Mistrals on a V7 with 1TB.
ANDYB
Title: Re: SC Products exhaust for V7 Classic
Post by: hannibal smith on September 30, 2016, 08:00:51 PM
Quote from: Andy1 on September 30, 2016, 03:12:28 PM
.......or take the lambdas out and plug the hole - worked just fine for me with Mistrals on a V7 with 1TB.
ANDYB

Can you elaborate? How does the ECU account for the missing sensor? Thanks-
Title: Re: SC Products exhaust for V7 Classic
Post by: hannibal smith on October 01, 2016, 10:03:14 AM
Quote from: pete roper on September 30, 2016, 02:09:57 PM
A two into one system like that with a single lambda input is going to play havoc with the fueling. It'll run like a three legged, hairy, goat unless you build a custom map for it.

Pete

The V7 Classic only has a single lambda input in the crossover from the factory. Unless I am missing something?