Wildguzzi.com

General Category => General Discussion => Topic started by: Mike Craven on November 19, 2016, 07:07:30 AM

Title: wiring diagram needed 2007 Norge
Post by: Mike Craven on November 19, 2016, 07:07:30 AM

I have the factory wiring diagram and the thisoldtractor sourced (Carl Allison's 27 Sep 2008 version) diagrams, but they are not accurate.  I have a no-start problem and the Off/Run/Start switch has 5 wires and 5 contacts with different colors/tracers than the diagrams.  Where have I missed the updated versions?
Any help is appreciated, tia,
Mike

Title: Re: wiring diagram needed 2007 Norge
Post by: lost on November 19, 2016, 07:55:19 AM

You might try Guzzitech.com. You can download the manuals from them. It will require a donation to the website but there is a lot available there.

Title: Re: wiring diagram needed 2007 Norge
Post by: Matteo on November 19, 2016, 07:59:19 AM

(http://thumb.ibb.co/ca7TVa/IMG_0032.gif) (http://ibb.co/ca7TVa)

Title: Re: wiring diagram needed 2007 Norge
Post by: guzzisteve on November 19, 2016, 08:34:33 AM

I have a factory hi=def I'll send ya

check your e

Title: Re: wiring diagram needed 2007 Norge
Post by: Mike Craven on November 19, 2016, 09:56:24 AM

Thanks all.  Steve, got it, revision 3 has the same errors.
I'll end up cutting open loom, tracing, etc.  Wow, no fun for a mechanic trying to trouble shoot.
Mike

Title: Re: wiring diagram needed 2007 Norge
Post by: Kiwi_Roy on November 19, 2016, 11:13:02 AM

Mike, do you get the dreaded click?
Perhaps you just need to do the bypass.


Sent from my shoe phone!

Title: Re: wiring diagram needed 2007 Norge
Post by: Mike Craven on November 19, 2016, 04:33:40 PM

No click.  I have the mod installed.  I had taken the Stop/Run/Start switch apart and it worked in my hand.  After complete reassembly it doesn't start and I'm trying to figure out what contacts might be bad.
Thanks,
Mike