Wildguzzi.com

General Category => General Discussion => Topic started by: Peter from Sch'dy on December 23, 2016, 11:26:02 AM

Title: crankshaft repair
Post by: Peter from Sch'dy on December 23, 2016, 11:26:02 AM

Hey there,
I've disassembled a V7Sport and found the rod and mains to be worn due to flaking cylinder chrome not being caught in time. Anybody know a good machine shop in the Albany NY area they'd trust to do this grinding work? I emailed Falicon a week ago with no response, but would much rather do this job locally if possible.
Best Regards,
Peter

Title: Re: crankshaft repair
Post by: Dick on December 23, 2016, 12:04:50 PM

Quote from: cheese1 on December 23, 2016, 11:26:02 AM

Hey there,
I've disassembled a V7Sport and found the rod and mains to be worn due to flaking cylinder chrome not being caught in time. Anybody know a good machine shop in the Albany NY area they'd trust to do this grinding work? I emailed Falicon a week ago with no response, but would much rather do this job locally if possible.
Best Regards,
Peter

http://twautomotiveandmachine.com/

I used him years back for crank balancing. Good guy.

Title: Re: crankshaft repair
Post by: Peter from Sch'dy on December 24, 2016, 02:39:12 PM

thanks much! I'll call them.
Best Regards,
Peter