Wildguzzi.com

General Category => General Discussion => Topic started by: ratguzzi on May 18, 2017, 07:29:30 PM

Title: Is my 04 raTi ready to blow up?
Post by: ratguzzi on May 18, 2017, 07:29:30 PM: Did a few things ratting it up, 10 gallon tank from my T3, standard handlebars, floor boards from a T with the frame rails, EV fenders, Givi bags, all ready for work travel. Test rides and today I notice a weird light banging noise between 2450 and 2500 rpm. Maybe cam chain, maybe the hydraulic lifters, maybe clutch. Try every rpm and it's the same, no matter the gear but rattles at 2450 and 2500 rpm. Figured it out and will tell you later!
JB
Title: Re: Is my 04 raTi ready to blow up?
Post by: fotoguzzi on May 18, 2017, 08:09:18 PM: Sidestand vibrating on the header?
Title: Re: Is my 04 raTi ready to blow up?
Post by: twowings on May 18, 2017, 08:13:06 PM: Something's loose...
Title: Re: Is my 04 raTi ready to blow up?
Post by: Lannis on May 18, 2017, 09:16:28 PM: If you changed something and now a new thing is happening ....

.... It's something you changed, guaranteed ....

Lannis
Title: Re: Is my 04 raTi ready to blow up?
Post by: ratguzzi on May 18, 2017, 09:25:10 PM: Quote from: fotoguzzi on May 18, 2017, 08:09:18 PM
Sidestand vibrating on the header?

The winner!!! Exactly right! Motor must have a weirdness at 2475 rpm and yes, I watched the sidestand shake like a mother! . Because of the floor board rail change, the sidestand rode up to the header.
I saved thousands having it such a simple thing!
JB
Title: Re: Is my 04 raTi ready to blow up?
Post by: Sasquatch Jim on May 18, 2017, 10:39:52 PM: Yes -----
Title: Re: Is my 04 raTi ready to blow up?
Post by: Carlo DeSantis on May 19, 2017, 12:47:53 AM: Quote from: fotoguzzi on Today at 07:09:18 PM
Sidestand vibrating on the header?

Quote from: ratguzzi on May 18, 2017, 09:25:10 PM
The winner!!! Exactly right! Motor must have a weirdness at 2475 rpm and yes, I watched the sidestand shake like a mother! . Because of the floor board rail change, the sidestand rode up to the header.
I saved thousands having it such a simple thing!
JB

Had the same thing on my EV. Must be a thing with that engine. A little re-aligment of the header and all was well.

Best,

Carlo
Title: Re: Is my 04 raTi ready to blow up?
Post by: Lannis on May 19, 2017, 08:25:46 AM: Quote from: ratguzzi on May 18, 2017, 09:25:10 PM
Because of the floor board rail change, the sidestand rode up to the header.
I saved thousands having it such a simple thing!
JB

Well, you sort of KNEW that the chances of a cam chain going bad at the same time you'd gone in and changed a floorboard rail were pretty darn slim .... :bow:

Lannis
Title: Re: Is my 04 raTi ready to blow up?
Post by: radguzzi on May 19, 2017, 10:22:27 AM: Backl when we had the 2000 Bassa I thought one side of the engine had a small end bushing going bad or actually already gone.... the rapping noise was right at a certain Rpm.

When I got her into the garage for inspection I found the front engine bolt had a slightly loosened and the washer on the side with the nut was causing the sound... fhew...!

Rob
Title: Re: Is my 04 raTi ready to blow up?
Post by: ratguzzi on May 19, 2017, 03:07:22 PM: A simple piece of steel with a small piece of velcro on the bracket to prevent any noise. The tab that helps you retract the kickstand was the culprit.
JB

(http://i273.photobucket.com/albums/jj221/ratguzzi/b1_zpszhqg0wmb.jpg) (http://s273.photobucket.com/user/ratguzzi/media/b1_zpszhqg0wmb.jpg.html)
Title: Re: Is my 04 raTi ready to blow up?
Post by: Chuck in Indiana on May 19, 2017, 05:46:24 PM: I was down in Louisiana when I first heard a noise like that. Rode it 1100 miles on pins and needles until I found it once I was home. :grin: Duh.