Wildguzzi.com

General Category => General Discussion => Topic started by: ctk111 on June 21, 2017, 07:28:31 PM

Title: T3 with Floorboards
Post by: ctk111 on June 21, 2017, 07:28:31 PM

Any suggestions on the best method for removing the oil cap?  Do you need to remove the gear shift first?  It's really tight and I can't get a socket in there.

Title: Re: T3 with Floorboards
Post by: acogoff on June 21, 2017, 07:52:45 PM

     Put the kick stand down out of the way. Place a long 7/8 box end wrench on the dipstick and tap it with a hammer.

Title: Re: T3 with Floorboards
Post by: ctk111 on June 21, 2017, 08:17:43 PM

Thanks! Worked perfectly.  I had tunnel vision thinking it can only be done using the tool in my hand.